ProjectOSX

Welcome Guest!

Returning User? Login here.

Want membership privileges? Register here.

40 Pages V  « < 38 39 40  
Start a new topic Add Reply
> Nvenabler Testing And Discussion, new universal kext for nVidia
Neolo
post Mar 17 2013, 07:42 PM
Post #781
QUOTE (Krazubu @ Mar 17 2013, 12:56 PM) *
Neolo,

You can try this NVCAP :
0500000000000600090000000000000a00000000

Here's a patched ROM to improve compatibility
[attachment=5992:10de_061...ched.rom.zip]


it can support : DVI + HDMI or VGA (standalone) + HDMI
it can not support : HDMI + VGA (with adapter FROM DVI)

Don't forget the display-cfgs I gave earlier, those are not details to get correct working.


Sounds good, but how do I load that rom? I can't use "UseNvidiaROM = Yes" key, because it loops in reboots when tries to load rom from extra folder.
And I'm not sure that I can use NVenabler because I was forced to remove it after 10.8.3 update.

EDIT: I tried to put NVCAP, bios (hexed) and displays cfg into NVenabler and got just blackout - none of ports are working sad.gif. NVenabler stopped work in 10.8.3 for some reason. (in verbose mode: False rom signature: 0x001 .... Card 9800GT detected .... probe fails)
I attached my NVEnabler with those modifications. Can you check it? I also changed versions for OSBundleLibraries according to NVDA*.kext in 10.8.3, but still nothing. Thank's.
Attached File  NVEnabler_10.8.3_9800GT_1GB.kext.zip ( 80.09K ) Number of downloads: 31


I also tried to put NVCAP_0614, displays cfgs in Chameleon's boot plist, but without UseNVidiaROm (as I noticed earlier it goes in reboots with that). VGA-VGA works fine, HDMI-HDMI No Signal. I can see in IOREG that NVCAP was properly hooked.

This post has been edited by Neolo: Mar 18 2013, 03:42 PM
IDDPioneer
post Mar 22 2013, 11:48 AM
Post #782
Hey guys, I couldn´t solve my problem yet, its better to open a new topic ? or Stay here ?

My problem is: If I put kexts for my Geforce GT 650M to load my OS X freezes at boot without KP, just freeze.
I tried with Geforce.kext and NVDAGK100Hal.kext and NVDAResman.kext, its enought to freeze, and yestarday I corrected my AGPM.kext
with the one from iMac13,1 that have the same vga as mine notebook, and when the system loads it, it freezes with the following line:

AGPM GPU Dict made by Vendor10deDevice0fd1


When this happened I´ve already erased the NVDAResman.kext that I need to boot.

Anyone can help me ?
IDDPioneer - HackBookPro 10,1
verdant
post Apr 6 2013, 04:34 PM
Post #783
QUOTE (Neolo @ Mar 17 2013, 08:42 PM) *
Sounds good, but how do I load that rom? I can't use "UseNvidiaROM = Yes" key, because it loops in reboots when tries to load rom from extra folder.
And I'm not sure that I can use NVenabler because I was forced to remove it after 10.8.3 update.

EDIT: I tried to put NVCAP, bios (hexed) and displays cfg into NVenabler and got just blackout - none of ports are working sad.gif. NVenabler stopped work in 10.8.3 for some reason. (in verbose mode: False rom signature: 0x001 .... Card 9800GT detected .... probe fails)
I attached my NVEnabler with those modifications. Can you check it? I also changed versions for OSBundleLibraries according to NVDA*.kext in 10.8.3, but still nothing. Thank's.
Attached File  NVEnabler_10.8.3_9800GT_1GB.kext.zip ( 80.09K ) Number of downloads: 31


I also tried to put NVCAP_0614, displays cfgs in Chameleon's boot plist, but without UseNVidiaROm (as I noticed earlier it goes in reboots with that). VGA-VGA works fine, HDMI-HDMI No Signal. I can see in IOREG that NVCAP was properly hooked.


Like you, on my ASUS P5N-32E SLI Plus 650i MOBO with an Inno3D GeForce 9800GT [G92] 512MB VGA/DVI/HDMI port graphics card connected to my DVI-D/VGA (No HDMI port) display via the DVI-D port, the NVEnabler64.kext stopped working entirely when I updated from 10.8.2 to 10.8.3!

The display just goes black and displays "No video input signal" at the end of the boot process when it should go the Desktop.

The same happens when I tried GraphicsEnabler=Yes, even with Chameleon v2.2svn r2189.

Thus, with 10.8.3, I now have to use DSDT graphics card injection; namely, rampagedev's nVidia Fermi & Quadro Graphics Card DSDT injection code for Device (GFX0) modified with my 9800 GT "VRAM,totalsize", "model" and "rom-revision" cosmetic fixes, inserted into my DSDT.aml's Device (XVRA) section.

Still, it would be nice to know what has stopped both NVEnabler64.kext and GraphicsEnabler=Yes working with 10.8.3 .....

This post has been edited by verdant: Apr 6 2013, 04:36 PM
Neolo
post Apr 6 2013, 04:54 PM
Post #784
QUOTE (verdant @ Apr 6 2013, 05:34 PM) *
Like you, on my ASUS P5N-32E SLI Plus 650i MOBO with an Inno3D GeForce 9800GT [G92] 512MB VGA/DVI/HDMI port graphics card connected to my DVI-D/VGA (No HDMI port) display via the DVI-D port, the NVEnabler64.kext stopped working entirely when I updated from 10.8.2 to 10.8.3!

The display just goes black and displays "No video input signal" at the end of the boot process when it should go the Desktop.

The same happens when I tried GraphicsEnabler=Yes, even with Chameleon v2.2svn r2189.

Thus, with 10.8.3, I now have to use DSDT graphics card injection; namely, rampagedev's nVidia Fermi & Quadro Graphics Card DSDT injection code for Device (GFX0) modified with my 9800 GT "VRAM,totalsize", "model" and "rom-revision" cosmetic fixes, inserted into my DSDT.aml's Device (XVRA) section.

Still, it would be nice to know what has stopped both NVEnabler64.kext and GraphicsEnabler=Yes working with 10.8.3 .....


I think it's because depending libraries are updated in OS. Currently I use pure GraphicsEnabler=Yes.
verdant
post Apr 6 2013, 06:25 PM
Post #785
QUOTE (Neolo @ Apr 6 2013, 05:54 PM) *
I think it's because depending libraries are updated in OS. Currently I use pure GraphicsEnabler=Yes.


I have just re-checked and found that using just NVEnabler64.kext by itself works for me in 10.8.2, if I use just GraphicsEnabler=Yes by itself, then also in 10.8.2, the display just goes black and displays "No video input signal" at the end of the boot process when it should go the Desktop.

Strange.....we both have 9800 GT graphics cards, yet you can use pure GraphicsEnabler=Yes in 10.8.2 and 10.8.3.....
Neolo
post Apr 6 2013, 06:36 PM
Post #786
QUOTE (verdant @ Apr 6 2013, 07:25 PM) *
I have just re-checked and found that using just NVEnabler64.kext by itself works for me in 10.8.2, if I use just GraphicsEnabler=Yes by itself, then also in 10.8.2, the display just goes black and displays "No video input signal" at the end of the boot process when it should go the Desktop.

Strange.....we both have 9800 GT graphics cards, yet you can use pure GraphicsEnabler=Yes in 10.8.2 and 10.8.3.....


Actually graph enabler not worked at the beginning in 10.8.3 as well as nvenabler. It will work after you will completely remove nvenabler include rebuilding system cache.
verdant
post Apr 6 2013, 06:40 PM
Post #787
QUOTE (Neolo @ Apr 6 2013, 07:36 PM) *
Actually graph enabler not worked at the beginning in 10.8.3 as well as nvenabler. It will work after you will completely remove nvenabler include rebuilding system cache.


Is not running sudo touch /Systems/Extensions/ sufficient to force rebuilding of the system cache?

In 10.8.2, I renamed NVEnabler64.kext and then run 'sudo touch /Systems/Extensions/' but then also also manually deleted kernelcache from /System/Library/Caches/com.apple.kext.caches/Startup/ and set GraphicsEnabler=Yes, and again got "No video input signal" at the end of the boot process....



This post has been edited by verdant: Apr 6 2013, 07:05 PM
falanger
post Jun 13 2013, 09:50 AM
Post #788
Hi guys. I have a problem to enable QE on my video cards. My laptop is asus 1215N
12.1", 1366х768
CPU: Intel Atom D525 1.8 GHz, HT, 64-bit
RAM: DDR3 4 Gb
HDD: 320 Gb
VC: NVIDIA ION2 (GT218) 512 Mb+Intel GMA 3150 256 Mb
One problem: that I can't disable one of my video cards in bios.
I have full resolution 1366x768 but all effect is very slowly. I read a lot of forums and I understand that my chance to enable QE on my video cards is very little. What I have now:
Hackintosh 10.8.2.
contents of org.chameleon.Boot.plist
CODE
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Boot Graphics</key>
    <string>Yes</string>
    <key>Credits</key>
    <string>Created with Champlist</string>
    <key>EnableHDMIAudio</key>
    <string>Yes</string>
    <key>EthernetBuiltIn</key>
    <string>Yes</string>
    <key>ForceWake</key>
    <string>Yes</string>
    <key>GenerateCStates</key>
    <string>Yes</string>
    <key>GeneratePStates</key>
    <string>Yes</string>
    <key>Graphics Mode</key>
    <string>1366x768x32</string>
    <key>GraphicsEnabler</key>
    <string>Yes</string>
    <key>Instant Menu</key>
    <string>Yes</string>
    <key>Kernel Flags</key>
    <string>npci=0x2000 darkwake=0</string>
    <key>Legacy Logo</key>
    <string>Yes</string>
    <key>UseKernelCache</key>
    <string>Yes</string>
</dict>
</plist>

contents of smbios.plist
CODE
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Copyright</key>
    <string>SMBios by 7ender @ InMac.org    Created with Champlist.app</string>
    <key>SMbiosvendor</key>
    <string>Apple Inc.</string>
    <key>SMbiosversion</key>
    <string>MBA31.88Z.0061.B01.1011181342</string>
    <key>SMboardproduct</key>
    <string>Mac-942452F5819B1C1B</string>
    <key>SMfamily</key>
    <string>MacBook Air</string>
    <key>SMproductname</key>
    <string>MacBookAir3,1</string>
    <key>SMserial</key>
    <string>C0050ZFCDR2</string>
        <key>SMexternalclock</key>
        <string>200</string>
        <key>SMmaximalclock</key>
        <string>1800</string>
        <key>SMmemtype</key>
        <string>24</string>
</dict>
</plist>

I was tried to enable QE with help of kext (Nvenabler, Nvdanv50hal, geforce and nvdaresman when i install the last (nvdaresman i have kernel panic)) with help of string and DSDT. Always I have the same - kernel panic or changing some features what are not influence on enabling QE.
Here it is the pictures of my video cards in system:
Attached File  ______________2013_06_13___15.47.44.png ( 88.06K ) Number of downloads: 9

Attached File  ______________2013_06_13___15.47.58.png ( 113.54K ) Number of downloads: 7
alexq
post Jun 13 2013, 11:43 AM
Post #789
You can always try clover.
Asus P7H55D-M Evo - Core i3-540 - 4GB - AMD Radeon HD 6450 (Caicos) - RTL8168B ethernet - 10.8.2 ML - CloverEFI.
falanger
post Jun 13 2013, 01:41 PM
Post #790
Do you really think that changing boot loader can fix this problem ? As for me, I don't think that type of boot loader influence such way. I can try, but I'll read more information about this before doing something. Thank you.
P.S. I forgot one thing, I always used kext for nvidia geforce gt210 because I haven't got kext exactly for my VC (nvidia ion2 or intel gma 3150) and edit their info.plist files. Kext was get from here http://www.osx86.net/downloads.php?do=file&id=3617

This post has been edited by falanger: Jun 13 2013, 02:14 PM
Slice
post Jun 14 2013, 03:08 AM
Post #791
The bootloader Clover do the same thing as Natit and other injectors. It injects properties . It just chooses them automatically like NVEnabler do.
You may test and compare results.
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.9.1, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
falanger
post Jun 14 2013, 07:21 AM
Post #792
I installed this version of clover http://www.osx86.net/downloads.php?do=file&id=3870 and then my system was crashed sad.gif Now, during loading I see only:
CODE
boot0:GPT
boot0:done
boot1:error

Also i had windows 7 on hdd.


This post has been edited by falanger: Jun 14 2013, 09:15 AM
Slice
post Jun 14 2013, 11:18 AM
Post #793
osx86.net is not official site for Clover.
See my signature.
Clover must work for your computer.
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.9.1, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
falanger
post Jun 14 2013, 11:50 AM
Post #794
I can run my system with help of bootable flash with clover. Now I'm reading and learning this http://applelife.ru/threads/clover.39812/ .
P.S. Slice - как я понял Вы один из разработчиков clover, прошу прощения что не признал. Сейчас курю сайт applelife.ru только зарегится на нём не могу, подтверждение не приходит.

This post has been edited by falanger: Jun 14 2013, 11:50 AM
Slice
post Jun 14 2013, 12:44 PM
Post #795
QUOTE (falanger @ Jun 14 2013, 03:50 PM) *
I can run my system with help of bootable flash with clover. Now I'm reading and learning this http://applelife.ru/threads/clover.39812/ .
P.S. Slice - как я понял Вы один из разработчиков clover, прошу прощения что не признал. Сейчас курю сайт applelife.ru только зарегится на нём не могу, подтверждение не приходит.

Давай-ка, из этой темы переместимся в http://www.projectosx.com/forum/index.php?showforum=130
Открывай там тему со своими проблемами.
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.9.1, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2

40 Pages V  « < 38 39 40
Add Reply Start a new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members: