QUOTE (Slice @ Dec 7 2010, 09:07 AM) 
I can't use rapidshare
http://www.projectosx.com/forum/index.php?...;f=142&id=7
http://www.projectosx.com/forum/index.php?...;f=142&id=7
Here it is:
My_Setup.zip ( 2.42MB )
Number of downloads: 89
DSDT
Differentiated System Description Table (DSDT) - DSDT is a part of the ACPI specification and it supplies configuration information about a base system. ACPI capable computers come with a preinstalled DSDT from the manufacturer. A common Linux/OS X problem is missing ACPI functionality (fans not running, laptop screens not shutting off, etc.)
This subforum is dedicated to patches/fixes able to be inserted/modified from an extracted dsdt.dsl, which is then compiled into a DSDT.aml for OS X to pick up and use (with a proper bootloader).
These fixes are not permanent, and do not damage your BIOS.
| Start a new topic Add Reply |
| New Dsdt For Dell Inspiron 1525 |
Dec 7 2010, 04:12 PM
Post #21
- Initiate
- Group: Comrade
- Posts: 7
- [Less]
Here it is:
My_Setup.zip ( 2.42MB )
Number of downloads: 89
Quote Dec 8 2010, 11:20 AM
Post #22
- Advanced Member
- Group: Developer
- Posts: 5,741
- [Less]
I have quite different setup.
/Extra/Extensions is empty
MacBook4,1 (corrected plist inside platform plugins)
Use vanilla kexts for
FakeSMC.kext - placed in /s/l/e
No nVClock inside (I have no nVidia card!)
No these kexts
cause I use VoodooHDA 2.7.2
VoodooBattery.kext -> AppleACPIBatteryManager
VoodooPS2Controller.kext -> ApplePS2Controller
/Extra/Extensions is empty
MacBook4,1 (corrected plist inside platform plugins)
Use vanilla kexts for
CODE
AppleIntelPIIXATA.kext
ATAPortInjector.kext
IOATAFamily.kext
ATAPortInjector.kext
IOATAFamily.kext
FakeSMC.kext - placed in /s/l/e
No nVClock inside (I have no nVidia card!)
No these kexts
CODE
AppleHDA.kext
HDAEnabler.kext
LegacyHDA.kext
HDAEnabler.kext
LegacyHDA.kext
cause I use VoodooHDA 2.7.2
VoodooBattery.kext -> AppleACPIBatteryManager
VoodooPS2Controller.kext -> ApplePS2Controller
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.8.4 (12E55),OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 RealtekR1000v3.0.4 Dec 8 2010, 07:00 PM
Post #23
- Initiate
- Group: Comrade
- Posts: 7
- [Less]
QUOTE (Slice @ Dec 8 2010, 12:20 PM)
I have quite different setup.
/Extra/Extensions is empty
MacBook4,1 (corrected plist inside platform plugins)
Use vanilla kexts for
FakeSMC.kext - placed in /s/l/e
No nVClock inside (I have no nVidia card!)
No these kexts
cause I use VoodooHDA 2.7.2
VoodooBattery.kext -> AppleACPIBatteryManager
VoodooPS2Controller.kext -> ApplePS2Controller
/Extra/Extensions is empty
MacBook4,1 (corrected plist inside platform plugins)
Use vanilla kexts for
CODE
AppleIntelPIIXATA.kext
ATAPortInjector.kext
IOATAFamily.kext
ATAPortInjector.kext
IOATAFamily.kext
FakeSMC.kext - placed in /s/l/e
No nVClock inside (I have no nVidia card!)
No these kexts
CODE
AppleHDA.kext
HDAEnabler.kext
LegacyHDA.kext
HDAEnabler.kext
LegacyHDA.kext
cause I use VoodooHDA 2.7.2
VoodooBattery.kext -> AppleACPIBatteryManager
VoodooPS2Controller.kext -> ApplePS2Controller
Slice,
Thanks for the tips, I will first remove the kexts I have placed in my Extra folder to see if I get any positive changes. I'll keep you posted on my findings.
Jun 7 2011, 07:44 AM
Post #24
- Initiate
- Group: Comrade
- Posts: 1
- [Less]
Hi Slice,
It would be great if u could attach your latest and current DSDT for reference, as am working on my native speed stepping. It helps me a lot in optimizing & correcting my DSDT with few cosmetic changes which u have.
My laptop is some what 8 to 10 degrees hotter with native speed stepping when compared to the use of Voodoo Pstate & mini kexts.
Regards,
Mahesh Kondraju
This post has been edited by Mahesh Kondraju: Jun 7 2011, 07:49 AM
It would be great if u could attach your latest and current DSDT for reference, as am working on my native speed stepping. It helps me a lot in optimizing & correcting my DSDT with few cosmetic changes which u have.
My laptop is some what 8 to 10 degrees hotter with native speed stepping when compared to the use of Voodoo Pstate & mini kexts.
Regards,
Mahesh Kondraju
This post has been edited by Mahesh Kondraju: Jun 7 2011, 07:49 AM
DELL Inspiron 1525 Notebook Mac OS X Snow leopard 10.6.7
Intel Pentium Dual T2370 @ 1.73 GHz Merom Profile ( cpu works cooler with VoodooPstate & VoodooPowermini with idle temp 42) 2.00 GB 533MHz
ICH8M chipset ST9160821AS SATA hard drive
Intel Audio installed Legacy HDA at E\E everything works 100% and for volume boost using Boom
Broadcom 4312 b/g Wireless (Dell wireless adapter) works 100% with Broadcom fix kext
Intel GMA X3100 0x2a02 0x000c works 100% QE/CI
Intel Pentium Dual T2370 @ 1.73 GHz Merom Profile ( cpu works cooler with VoodooPstate & VoodooPowermini with idle temp 42) 2.00 GB 533MHz
ICH8M chipset ST9160821AS SATA hard drive
Intel Audio installed Legacy HDA at E\E everything works 100% and for volume boost using Boom
Broadcom 4312 b/g Wireless (Dell wireless adapter) works 100% with Broadcom fix kext
Intel GMA X3100 0x2a02 0x000c works 100% QE/CI
Jun 7 2011, 08:49 AM
Post #25
- Advanced Member
- Group: Developer
- Posts: 5,741
- [Less]
QUOTE (Mahesh Kondraju @ Jun 7 2011, 11:44 AM)
Hi Slice,
It would be great if u could attach your latest and current DSDT for reference, as am working on my native speed stepping. It helps me a lot in optimizing & correcting my DSDT with few cosmetic changes which u have.
My laptop is some what 8 to 10 degrees hotter with native speed stepping when compared to the use of Voodoo Pstate & mini kexts.
Regards,
Mahesh Kondraju
It would be great if u could attach your latest and current DSDT for reference, as am working on my native speed stepping. It helps me a lot in optimizing & correcting my DSDT with few cosmetic changes which u have.
My laptop is some what 8 to 10 degrees hotter with native speed stepping when compared to the use of Voodoo Pstate & mini kexts.
Regards,
Mahesh Kondraju
No change since post#5. 10.6.7 works fine.
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.8.4 (12E55),OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 RealtekR1000v3.0.4 Feb 24 2012, 12:08 AM
Post #26
- Initiate
- Group: Comrade
- Posts: 6
- [Less]
Hello, privet, bonjour, hola 
Here is a new version of the DSDT.
Basically, it is just a rework of a melange of Slices very good DSDT and parts of my old one, BUT - this time also with some fixes after renaming all the components to match the MacBook4,1 specs. I don't now exactly what made the difference, but since I use this DSDT my Dell doesn't get hot anymore, and it is really much faster. Also, some wake-up issues are gone now.
to sum it up:
PRO:
- I have to say, here it speeds up my Dell up to 1/4 by having constant temperatures around 30 degree celsius on both cpus while browsing the we
- added FAN Speed detection (iStat nano etc.)
CONS:
I have not tested it with 10.6.8 or lion, because I feel lucky with 10.6.7. So maybe just rename the DSDT and give it a try. Simply type DSDT=NAMEOFFILE at the bootprompt to boot the desired one.
I also put my boot.plist and the smbios in the package so that you can see where differences might be. I use dropssdt=yes and generate c-states for
example.
maybe you might give it a try
Download (updated on sunday 26.)
goes_into_extra.zip ( 13.62K )
Number of downloads: 77
Cheers,
xtraa
This post has been edited by xtraa: Feb 26 2012, 01:59 PM
Here is a new version of the DSDT.
Basically, it is just a rework of a melange of Slices very good DSDT and parts of my old one, BUT - this time also with some fixes after renaming all the components to match the MacBook4,1 specs. I don't now exactly what made the difference, but since I use this DSDT my Dell doesn't get hot anymore, and it is really much faster. Also, some wake-up issues are gone now.
to sum it up:
PRO:
- I have to say, here it speeds up my Dell up to 1/4 by having constant temperatures around 30 degree celsius on both cpus while browsing the we
- added FAN Speed detection (iStat nano etc.)
CONS:
I have not tested it with 10.6.8 or lion, because I feel lucky with 10.6.7. So maybe just rename the DSDT and give it a try. Simply type DSDT=NAMEOFFILE at the bootprompt to boot the desired one.
I also put my boot.plist and the smbios in the package so that you can see where differences might be. I use dropssdt=yes and generate c-states for
example.
maybe you might give it a try
Download (updated on sunday 26.)
goes_into_extra.zip ( 13.62K )
Number of downloads: 77Cheers,
xtraa
This post has been edited by xtraa: Feb 26 2012, 01:59 PM
Feb 24 2012, 04:28 AM
Post #27
- Advanced Member
- Group: Developer
- Posts: 5,741
- [Less]
Thank you for the effort, I will try little later when I will be with the notebook.
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.8.4 (12E55),OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 RealtekR1000v3.0.4 Feb 26 2012, 02:04 PM
Post #28
- Initiate
- Group: Comrade
- Posts: 6
- [Less]
QUOTE (Slice @ Feb 24 2012, 05:28 AM)
Thank you for the effort, I will try little later when I will be with the notebook.
Hi Slice,
please trash this one and download again, I made a few more fixes and updated the DSDT.
Now USB and erm... sound are working again
Changes:
- Renamed EHCI to EHC1
- Moved stuff to LPCB
- Set KBR to EC
| Add Reply Start a new topic |
0 Members:
