Device (SMCD)
{
Name (_HID, "monitor")
Method (FAN0, 0, NotSerialized)
{
Store (^^EC0.TA02, Local0)
Store (^^EC0.TA01, Local1)
ShiftLeft (Local0, 0x08, Local0)
Or (Local0, Local1, Local0)
Store (0x80, Local2)
Store (0x02, Local3)
Multiply (Local2, Local3, Local4)
Multiply (Local0, Local4, Local5)
Divide (0x03938700, Local5, Local6, Local7)
Multiply (Local7, 0x0A, Local7)
Return (Local7)
}
}

Device (SIOR) // Super IO Registers
{
Name (_HID, "MONITOR") // HWMonitor driver will look for this in order to load or not
Name (_STA, 0x0F)
Name (_CRS, ResourceTemplate () {IO (Decode16, 0x0290, 0x0290, 0x01, 0x10)})
OperationRegion (HWRE, SystemIO, 0x0290, 0x0A)
Field (HWRE, ByteAcc, NoLock, Preserve)
{
Offset (0x05),
HIDX, 8, // ADDRESS_REGISTER_OFFSET = 0x05
HDAT, 8 // DATA_REGISTER_OFFSET = 0x06
}

IndexField (HIDX, HDAT, ByteAcc, NoLock, Preserve) // BANK #0
{
Offset (0x00), // Bank #0 SMBus Register Map
SDAT, 8, // Bank0, Index 00h, SMBus Data (SMDATA)
SWSZ, 8, // Bank0, Index 01h, SMBus Write Data Size (SMWRSIZE)
SCMD, 8, // Bank0, Index 02h, SMBus Command (SMCMD)
SIDX, 8, // Bank0, Index 03h, SMBus INDEX (SMIDX)
SCTL, 8, // Bank0, Index 04h, SMBus Control (SMCTL)
SADR, 8, // Bank0, Index 05h, SMBus Address (SMADDR)
SCLF, 8, // Bank0, Index 06h, SCL FREQ (SCLFREQ)
, 8, // Bank0, Index 07h, Reserved
PADR, 8, // Bank0, Index 08h, PCH Address (PCHADDR)
ERRS, 8, // Bank0, Index 09h, SMBus Error Status (Error_status)
, 8, // Bank0, Index 0Ah, Reserved
PCMD, 8, // Bank0, Index 0Bh, PCH Command (PCHCMD)
, 8, // Bank0, Index 0Ch, Reserved
TSIA, 8, // Bank0, Index 0Dh, TSI Agent Enable Register (TSI_AGENT)
CTL3, 8, // Bank0, Index 0Eh, SMBus Control 3 Register (SMCTL3)
CTL2, 8, // Bank0, Index 0Fh, SMBus Control 2 Register (SMCTL2)
BADR, 8, // Bank0, Index 10h, BYTE ADDRESS (BYTE ADDR)
BIXH, 8, // Bank0, Index 11h, BYTE_IDX_H (High BYTE INDEX)
BIXL, 8, // Bank0, Index 12h, BYTE_IDX_L (LOW BYTE INDEX)
, 8, // Bank0, Index 13h, Reserved
, 8, // Bank0, Index 14h, Reserved
Offset (0x20), // Bank #0 Voltages
VCOR, 8, // Bank0, Index 20h - CPUVCORE - nominal voltage 1.2 V
V12V, 8, // Bank0, Index 21h - VIN0 +12 V
V33A, 8, // Bank0, Index 22h - AVCC -Analog +3.3 V power input. Internally supply power to all analog circuits.
V33V, 8, // Bank0, Index 23h - 3VCC +3.3 V power supply for driving 3 V on host interface.
V12N, 8, // Bank0, Index 24h - VIN1 +5V
VIN2, 8, // Bank0, Index 25h - VIN2 +5VSB
VIN3, 8, // Bank0, Index 26h - VIN3 +3.3V
Offset (0x4E),
BSEL, 3, // BANK_SELECT_REGISTER
Offset (0x5D), // Bank #0 VBAT Monitor Control Register
BATE, 1, // Bank0, Index 5Dh, Bit0 - EN_VBAT_MNT, 1: Enable battery voltage monitor
Offset (0x73), // Bank #0 Monitored Voltage Temperature
SYST, 8, // Bank0, Index 73h - SYSTIN
Offset (0x75),
CPUT, 8, // Bank0, Index 75h - CPUTIN
Offset (0x77),
AUXT, 8, // Bank0, Index 77h - AUXTIN
Offset (0xAE), // Bank0, Index AEh - PECI Agent Enable Register
PAG0, 1, // Bank0, Index AEh, bit0 - 0x01 to enable PECI Agent 0 mode
}

IndexField (HIDX, HDAT, ByteAcc, NoLock, Preserve) // BANK #2
{
Offset (0x00),
AGNT, 8, // Bank2, Index 00h - PECI Agent, 0Ch to select PECI Agent 0 as CPUFAN monitoring source
}

IndexField (HIDX, HDAT, ByteAcc, NoLock, Preserve) // BANK #3
{
Offset (0x00), // Bank #3 AUXFAN Monitor Temperature Source Select Register/STOPDUTY Enable Register
ATSS, 5, // Bank3, Index 00h, Bit0-4 - AUXFAN Temperature Source Select
}

IndexField (HIDX, HDAT, ByteAcc, NoLock, Preserve) // BANK #5
{
Offset (0x50), // Bank #5 Voltages
V3SB, 8, // Bank5, Index 50h - 3VSB +3.3 V stand-by power supply for the digital circuits
VBAT, 8, // Bank5, Index 51h - +3 V on-board battery for the digital circuits(EN_VBAT_MNT MUST BE SET!)
}

IndexField (HIDX, HDAT, ByteAcc, NoLock, Preserve) // BANK #6
{
Offset (0x3A), // Bank #6 FAN MIN RPM READING
F0MH, 8, // Bank6, Index 3Ah - SYSFANIN MIN High Byte
F0ML, 8, // Bank6, Index 3Bh - SYSFANIN MIN Low Byte
F1MH, 8, // Bank6, Index 3Ch - CPUFANIN MIN High Byte
F1ML, 8, // Bank6, Index 3Dh - CPUFANIN MIN Low Byte
F2MH, 8, // Bank6, Index 3Eh - AUXFANIN0 MIN High Byte
F2ML, 8, // Bank6, Index 3Fh - AUXFANIN0 MIN Low Byte
F3MH, 8, // Bank6, Index 40h - AUXFANIN1 MIN MIN High Byte
F3ML, 8, // Bank6, Index 41h - AUXFANIN1 MIN Low Byte
F4MH, 8, // Bank6, Index 42h - AUXFANIN2 MIN High Byte
F4ML, 8, // Bank6, Index 43h - AUXFANIN2 MIN Low Byte
Offset (0x56), // Bank #6 FAN RPM READING
F0HB, 8, // Bank6, Index 56h - SYSFANIN High Byte
F0LB, 8, // Bank6, Index 57h - SYSFANIN Low Byte
F1HB, 8, // Bank6, Index 58h - CPUFANIN High Byte
F1LB, 8, // Bank6, Index 59h - CPUFANIN Low Byte
F2HB, 8, // Bank6, Index 5Ah - AUXFANIN0 High Byte
F2LB, 8, // Bank6, Index 5Bh - AUXFANIN0 Low Byte
F3HB, 8, // Bank6, Index 5Ch - AUXFANIN1 High Byte
F3LB, 8, // Bank6, Index 5Dh - AUXFANIN1 Low Byte
F4HB, 8, // Bank6, Index 5Eh - AUXFANIN2 High Byte
F4LB, 8, // Bank6, Index 5Fh - AUXFANIN2 Low Byte
}

IndexField (HIDX, HDAT, ByteAcc, NoLock, Preserve) // BANK #7
{
Offset (0x00),
, 8,
PEFR, 8, // Bank7, Index 01h - PECI Enable Function Register, 95h to enable PECI3.0
Offset (0x03),
CPUS, 8, // Bank7, Index 03h - Select CPU Agent and Domain, 10h to select Agent 0 and Domain 0.
Offset (0x05),
CADR, 8, // Bank7, Index 05h - Client Address
WLEN, 8, // Bank7, Index 06h - Write Length
RLEN, 8, // Bank7, Index 07h - Read Length
CMDC, 8, // Bank7, Index 08h - Cmd Code
TBS0, 8, // Bank7, Index 09h - Tbase0 temperature for CPU Agent 0
Offset (0x0B),
WDT1, 8, // Bank7, Index 0Bh - Write Data 1
WDT2, 8, // Bank7, Index 0Ch - Write Data 2
WDT3, 8, // Bank7, Index 0Dh - Write Data 3
WDT4, 8, // Bank7, Index 0Eh - Write Data 4
Offset (0x17), // PECI temperature raw data
TRHB, 8, // Bank7, Index 17h - PECI temperature raw data High Byte
TRLB, 8, // Bank7, Index 18h - PECI temperature raw data Low Byte
Offset (0x26),
WFCS, 8, // Bank7, Index 26h - Retrieve PECI WFCS related data from client
RFCS, 8, // Bank7, Index 27h - Retrieve PECI RFCS related data from client
Offset (0x2A),
RDT1, 8, // Bank7, Index 2Ah - Read Data 1
RDT2, 8, // Bank7, Index 2Bh - Read Data 2
RDT3, 8, // Bank7, Index 2Ch - Read Data 3
RDT4, 8, // Bank7, Index 2Dh - Read Data 4
RDT5, 8, // Bank7, Index 2Eh - Read Data 5
RDT6, 8, // Bank7, Index 2Fh - Read Data 6
RDT7, 8, // Bank7, Index 30h - Read Data 7
RDT8, 8, // Bank7, Index 31h - Read Data 8
RDT9, 8, // Bank7, Index 32h - Read Data 9
}

Method (TSYS, 0, NotSerialized) // System Temperature Sensor
{
Store (Zero, BSEL)
Return (SYST)
}

Method (TCPU, 0, NotSerialized) // CPU Temperature Sensor
{
Store (Zero, BSEL)
Return (CPUT)
}

Method (FAN0, 0, NotSerialized) // System FAN Speed
{
Store (0x06, BSEL)
Store (F0HB, Local0)
Store (F0LB, Local1)
Add (Local0, Local1, Local2)
Multiply (Local2, 0x0A, Local3)
Return (Local3)
}

Method (FAN1, 0, NotSerialized) // CPU FAN Speed
{
Store (0x06, BSEL)
Store (F1HB, Local0)
Store (F1LB, Local1)
Add (Local0, Local1, Local2)
Multiply (Local2, 0x0A, Local3)
Return (Local3)
}

Method (VCPU, 0, NotSerialized) // CPUVCORE: CPU Voltage Sensor
{
Store (Zero, BSEL)
Return (Multiply (VCOR, 0x08))
}

Method (P12V, 0, NotSerialized) // VIN0: +12 V or CPUVCCIO???
{
Store (Zero, BSEL)
Return (Multiply (V12V, 0x08))
}

Method (VSN1, 0, NotSerialized) // AVCC: Analog +3.3 V
{
Store (Zero, BSEL)
Return (Multiply (V33A, 0x10))
}

Method (VSN2, 0, NotSerialized) // 3VCC: +3.3 V
{
Store (Zero, BSEL)
Return (Multiply (V33V, 0x10))
}

Method (VSN3, 0, NotSerialized) // 3VSB: +3.3 V
{
Store (0x05, BSEL)
Return (Multiply (V3SB, 0x10))
}

Method (VSN4, 0, NotSerialized)// VBAT: +3 V
{
Store (Zero, BSEL)
Store (One, BATE)
Store (0x05, BSEL)
Return (Multiply (VBAT, 0x10))
}

Method (VSN5, 0, NotSerialized) // VIN1: -12 V? or +5 V???
{
Store (Zero, BSEL)
Return (Multiply (V12N, 0x08))
}

Method (VSN6, 0, NotSerialized) // VIN2: DRAM or too high???
{
Store (Zero, BSEL)
Return (Multiply (VIN2, 0x08))
}

Method (VSN7, 0, NotSerialized) // VIN3: CPUPLL??
{
Store (Zero, BSEL)
Return (Multiply (VIN3, 0x08))
}

// AUXFAN Temperature Source Select:

// 0x01: Select SYSTIN as AUXFAN monitoring source. OK!
// 0x02: Select CPUTIN as AUXFAN monitoring source. NOT OK! Gave the value in fahrenheit?
// 0x03: Select AUXTIN as AUXFAN monitoring source. (Default)
// 0x04: Select SMBUSMASTER 0 as AUXFAN monitoring source.
// 0x05: Select SMBUSMASTER 1 as AUXFAN monitoring source.
// 0x06: Select SMBUSMASTER 2 as AUXFAN monitoring source.
// 0x07: Select SMBUSMASTER 3 as AUXFAN monitoring source.
// 0x08: Select SMBUSMASTER 4 as AUXFAN monitoring source.
// 0x09: Select SMBUSMASTER 5 as AUXFAN monitoring source.
// 0x0A: Select SMBUSMASTER 6 as AUXFAN monitoring source.
// 0x0B: Select SMBUSMASTER 7 as AUXFAN monitoring source.
// 0x0C: Select PECI Agent 0 as AUXFAN monitoring source.
// 0x0D: Select PECI Agent 1 as AUXFAN monitoring source.
// 0x0E: Select PCH_CHIP_CPU_MAX_TEMP as AUXFAN monitoring source.
// 0x0F: Select PCH_CHIP_TEMP as AUXFAN monitoring source.
// 0x10: Select PCH_CPU_TEMP as AUXFAN monitoring source.
// 0x11: Select PCH_MCH_TEMP as AUXFAN monitoring source.
// 0x12: Select PCH_DIM0_TEMP as AUXFAN monitoring source.
// 0x13: Select PCH_DIM1_TEMP as AUXFAN monitoring source.
// 0x14: Select PCH_DIM2_TEMP as AUXFAN monitoring source.
// 0x15: Select PCH_DIM3_TEMP as AUXFAN monitoring source.
// 0x16: Select BYTE_TEMP as AUXFAN monitoring source.

Method (TAMB, 0, NotSerialized) // AUXFAN Temperature Source Select Hack
{
Store (0x03, BSEL)
Store (0x0C, ATSS) // Select AUXFAN monitoring source
Store (Zero, BSEL)
Return (AUXT)
}
}

Scope (_TZ)
{
Mutex (THR0, 0x00)
PowerResource (FN10, 0x00, 0x0000)
{
Method (_ON, 0, NotSerialized)
{
}
Method (_OFF, 0, NotSerialized)
{
}
Method (_STA, 0, NotSerialized)
{
Return (One)
}
}
Device (FN1)
{
Name (_HID, EisaId ("PNP0C0B"))
Name (_UID, One)
Name (_PR0, Package (0x01)
{
FN10
})
Method (_PS0, 0, NotSerialized)
{
}
Method (_PS3, 0, NotSerialized)
{
}
}
ThermalZone (THRM)
{
Name (INIT, Zero)
Name (MODE, Zero)
Name (TERR, Zero)
Name (LEVE, Zero)
Name (PINT, Zero)
Method (_CRT, 0, NotSerialized)
{
Store (0x63, Local0)
Multiply (Local0, 0x0A, Local0)
Add (Local0, 0x0AAA, Local0)
Return (Local0)
}
Method (_PSV, 0, NotSerialized)
{
If (ECON)
{
If (TRLX)
{
Multiply (0x50, 0x0A, Local0)
}
Else
{
Multiply (0x5A, 0x0A, Local0)
}
Add (Local0, 0x0AAA, Local0)
}
Else
{
Store (0x0D9A, Local0)
}
Return (Local0)
}
Name (_PSL, Package (0x02)
{
\_PR.CPU0,
\_PR.CPU1
})
Method (_AC0, 0, NotSerialized)
{
Store (0x23, Local0)
Multiply (Local0, 0x0A, Local0)
Add (Local0, 0x0AAA, Local0)
Return (Local0)
}
Name (_AL0, Package (0x01)
{
FN1
})
Method (_SCP, 1, NotSerialized)
{
Store (Arg0, MODE)
}
Method (_TMP, 0, NotSerialized)
{
If (ECON)
{
If (LGreater (DTS1, DTS2))
{
Store (DTS1, Local1)
}
Else
{
Store (DTS2, Local1)
}
Multiply (Local1, 0x0A, Local0)
Add (Local0, 0x0AAA, Local0)
Return (Local0)
}
Return (Zero)
}
Name (_TC1, 0x04)
Name (_TC2, 0x03)
Name (_TSP, 0x96)
Name (THIN, One)
Name (TRLX, Zero)
Method (SFAN, 1, NotSerialized)
{
\_SB.PCI0.LPCB.KBC0.SMWR (0x06, 0x7A, 0x20, One)
If (Arg0)
{
If (LEqual (Arg0, One))
{
\_SB.PCI0.LPCB.KBC0.SMWR (0x06, 0x7A, 0x10, 0x99)
}
Else
{
If (LEqual (Arg0, 0x02))
{
\_SB.PCI0.LPCB.KBC0.SMWR (0x06, 0x7A, 0x10, 0x7B)
}
Else
{
\_SB.PCI0.LPCB.KBC0.SMWR (0x06, 0x7A, 0x10, 0x6D)
}
}
}
Else
{
\_SB.PCI0.LPCB.KBC0.SMWR (0x06, 0x7A, 0x10, 0xFF)
}
\_SB.PCI0.LPCB.KBC0.SMWR (0x06, 0x7A, 0x20, Zero)
}
Name (N_ST, Zero)
Name (L_ST, Zero)
Name (TMST, Package (0x0A)
{
0x24,
0x2B,
0x35,
0x3F,
0x49,
0x4E,
0x58,
0x60,
0x64,
0x69
})
Method (THCK, 0, NotSerialized)
{
Store (Zero, GPEC)
Acquire (THR0, 0xFFFF)
If (LGreater (DTS1, DTS2))
{
Store (DTS1, Local0)
}
Else
{
Store (DTS2, Local0)
}
Store (Zero, N_ST)
While (LGreater (Local0, DerefOf (Index (TMST, N_ST))))
{
If (LEqual (N_ST, 0x08))
{
Break
}
Else
{
Increment (N_ST)
}
}
If (LGreater (N_ST, L_ST))
{
If (Or (LEqual (N_ST, Zero), LEqual (N_ST, One)))
{
SFAN (Zero)
}
Else
{
If (Or (LEqual (N_ST, 0x02), LEqual (N_ST, 0x03)))
{
SFAN (One)
}
Else
{
If (Or (LEqual (N_ST, 0x04), LEqual (N_ST, 0x05)))
{
SFAN (0x02)
}
Else
{
SFAN (0x03)
If (LGreater (N_ST, 0x06))
{
Store (One, TRLX)
Notify (THRM, 0x81)
Notify (THRM, 0x80)
}
Else
{
}
}
}
}
}
Else
{
If (LLess (N_ST, L_ST))
{
If (And (LGreater (L_ST, 0x06), LLess (N_ST, 0x07)))
{
Store (Zero, TRLX)
Notify (THRM, 0x81)
Notify (THRM, 0x80)
}
If (LNot (N_ST))
{
SFAN (Zero)
}
Else
{
If (Or (LEqual (N_ST, One), LEqual (N_ST, 0x02)))
{
SFAN (One)
}
Else
{
If (Or (LEqual (N_ST, 0x03), LEqual (N_ST, 0x04)))
{
SFAN (0x02)
}
Else
{
SFAN (0x03)
}
}
}
}
}
Store (N_ST, L_ST)
Release (THR0)
}
}
}