I'm on 10.6.8 retail with Xcode 3.2.6.

I downloaded the zip and compiled 64-bit 'release' builds of Fakesmc, Winbond, SuperIO and IntelThermal.

Added SMC version for MacPro3,1 to FakSMC, a plugins folder to SuperIO and placed Winbond in it. Added my TJMax to IntelThermal, FANINLIMIT and fan names to Winbond.

Placed everything in /Extra/Extensions on my EFI partition.

FakeSMC works but there's no trace of it in the logs. Looks right in IOREG. Bresinks temperature monitor works but iStat doesn't show temps or fans because...

IntelThermal:

11/10/11 1:10:34 AM kernel IntelThermal: [Warning] Can't add key to fake SMC device, kext will not load
11/10/11 1:10:34 AM kernel IntelThermal: using predefined Tjmax value: 100
11/10/11 1:10:34 AM kernel IntelThermal: CPU family 0x6, model 0x17, stepping 0xa, cores 2, threads 0, TJmax 100

Winbond:
11/10/11 1:10:34 AM kernel W836x: [Warning] wrong vendor chip ID=0xa5 REVISION=0x13 VENDORID=0xffff

..and they don't load.

Normally (with hwsensors svn versions) I get:

Oct 30 03:24:56 localhost kernel[0]: IntelThermal: Based on code by mercurysquad, superhai ©2008
Oct 30 03:24:56 localhost kernel[0]: IntelThermal: CPU family 0x6, model 0x17, stepping 0xa, cores 2, threads 0
Oct 30 03:24:56 localhost kernel[0]: IntelThermal: CPU Tjmax 100

Nov 6 22:34:34 localhost kernel[0]: W836x: based on code from Open Hardware Monitor project by Michael M�ller © 2010
Nov 6 22:34:34 localhost kernel[0]: W836x: mozodojo © 2011
Nov 6 22:34:34 localhost kernel[0]: W836x: found Winbond W83667HG

According to CPUID's Hardware Monitor on Windows my Winbond sensor is model W83627DHG.

This post has been edited by Gringo Vermelho: Nov 10 2011, 03:31 AM

hello slice

in radeonmonitor can you include the 68e0 ?

is a 5470 mobility

thanks for your job in os x

regards

No problem. here

hello slice

is working well with isat menus

thanks

New version for test
 FakeSMC_3.2.0_with_Plugins_rev513.zip ( 293.81K ) Number of downloads: 190

Including Nuvoton from THeKiNG today version.

Hello Slice, can you include in RadeonMonitor 6779 for ATI 6450 ?

No problem.
 RadeonMonitor.kext.zip ( 21.49K ) Number of downloads: 17


PS. I can include any chip but I don't know if they are exists.

So, is the SuperIOFamily.kext now obsolete and its plugins now load from the actual FakeSMC.kext plugins directory? Thanks!

This post has been edited by Darwin: Feb 15 2012, 01:34 PM

After some bugs corrections revision 530 in topic.

excuse me please but i have a problem i put both fakesmc and intelcpumonitor into s/l/e with kext wizard,and fixed the premission with kext utility but i get a kernel panic after i reboot, it says intlcpumonitor:cant write keys to fakesmc driver not loaded! if i remove the intelcpumonitor i can boot in to system again any ideas? hope someone can answer me thanks

Be sure that FakeSMC and IntelCPUMonitor comes from the same revision.

Dyld Error Message:
Symbol not found: _objc_retain
Referenced from: .../FakeSMCv4_rev530_plugins/HWMonitorExtra.menu/Contents/MacOS/HWMonitorExtra
Expected in: /usr/lib/libobjc.A.dylib

just want to report following error, seems to do nothing, just to let you know.

thx for the new compilation v.4

This post has been edited by westwaerts: Feb 22 2012, 08:28 AM

Thanks for the advice working prefectly now thanks you so much

Rev 530 works just fine on my GA-Z68XP-UD3, except that my GTS 250 temp doesn't show up correctly, and the one you patched to work doesn't work with the latest revision. It shows GPU Heatsink but no GPU diode and the GPU Heatsink temp shows like 6-7C, any fix for this?

2/23/12 11:24:17.000 PM kernel: NVClockX: NVClock Darwin port by alphamerik © 2010
2/23/12 11:24:17.000 PM kernel: NVClockX: usr-sse2 © 2010
2/23/12 11:24:17.000 PM kernel: NVClockX: Card: 0, Vendor ID: 10de, Device ID: 615, Architecture: 20000, G84 [GeForce GTS 250]
2/23/12 11:24:17.000 PM kernel: NVClockX: BIOS successfully read
2/23/12 11:24:17.000 PM kernel: NVClockX: [Warning] Unhandled init script entry with id '�' at c7d8

This post has been edited by scififan68: Feb 24 2012, 05:46 AM

Try this version with FakeSMC-v4
 NVClockX.kext_G84.zip ( 78.79K ) Number of downloads: 89

Hey slice, thanks very much, it now shows correctly!


2/24/12 10:19:55.000 PM kernel: NVClockX: Card: 0, Device ID: 615, Architecture: 40000, G92 [GeForce GTS 250]
2/24/12 10:19:55.000 PM kernel: NVClockX: BIOS successfully read
2/24/12 10:19:55.000 PM kernel: NVClockX: Parsing BIOS complete
2/24/12 10:19:55.000 PM kernel: NVClockX: Adding temperature sensors
2/24/12 10:19:55.000 PM kernel: NVClockX: Adding frequency sensor
2/24/12 10:19:55.000 PM kernel: NVClockX: Overclocking...

What? How can it overclock the card if the frequencies will be overriden by nVidia drivers when switching into 3d mode?

@slice just one stupid question

for version v4 is superIOfamily not nescessary any more ? just ite827 ?
cause it was not in the package

This post has been edited by westwaerts: Feb 25 2012, 11:03 PM

Forget it.

Slice， eager to know what's SmartGuardian that lies in rev581 of Fakesmc
is it related to SMART of HD ？