ProjectOSX

Welcome Guest!

Returning User? Login here.

Want membership privileges? Register here.

9 Pages V  < 1 2 3 4 > »   
Start a new topic Add Reply
> Intelcpumonitor, IntelCPUMonitor Plug-in Topic
noam a
post Dec 27 2010, 03:59 AM
Post #21
QUOTE (Slice @ Dec 26 2010, 10:49 PM) *
Show your bdmesg (messages from bootloader).

i have bdmesg only from your bootloader, so i run it, still no change with xeon and istat manus
here is the bdmesg

CODE
measure_tsc_frequency = 2400MHz
msr(0x0198): ia32_perf_stat 0x06000924
max: 9 current: 9
msr(0x0017): MSR_IA32_PLATFORM_ID 0x88408924
DMI Chassis Info:
Type=3
Boot-up State=3
Power Supply=3 Thermal State=3
CPU is Desktop
CPU: Vendor/Model/ExtModel: 0x756e6547/0xf/0x0
CPU: Family/ExtFamily: 0x6/0x0
CPU: MaxCoef/CurrCoef: 0x9/0x9
CPU: MaxDiv/CurrDiv: 0x1/0x1
CPU: TSCFreq: 2400MHz
CPU: FSBFreq: 266MHz
CPU: CPUFreq: 2400MHz
CPU: NoCores/NoThreads: 4/4
CPU: Features: 0x0000024f
Attempting to read GPT
Read GPT
Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B
Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC
bvr: 8263a70, dev: 82, part: 1, flags: 4, vis: 1
bvr: 8263b40, dev: 81, part: 6, flags: 4, vis: 1
bvr: 8263c10, dev: 81, part: 5, flags: a, vis: 0
bvr: 8263ce0, dev: 81, part: 1, flags: 4b, vis: 1
bvr: 8263db0, dev: 80, part: 2, flags: 4a, vis: 1
count: 4
Scanning device 80...Setting boot-uuid to: 01A1C627-46B3-3A22-84E3-F67149ECCDF4
Loading Darwin 10.6
Loading kernel mach_kernel
Using PCI-Root-UID value: 0
nVidia GeForce 8400 GS 256MB NV86 [10de:0422] :: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)
NVCAP: 04000000-00000300-0c000000-0000000a-00000000
Intel P35/G33 DRAM Controller [8086:29c0] at 00:00.0
Frequency detected: 333 MHz (666) Dual Channel
CAS:5 tRC:5 tRP:5 RAS:15 (5-5-5-15)
Table (type 17) : addr=0x000f0d53 len=0059
Ofs-00-01-02-03-04-05-06-07-08-09-0A-0B-0C-0D-0E-0F ASCII
00: 11 1b 32 00 30 00 fe ff 40 00 40 00 00 04 09 00 ..2.0...@.@.....
10: 01 02 13 80 00 9b 02 03 04 05 06 44 49 4d 4d 30 ...........DIMM0
20: 00 42 41 4e 4b 30 00 4d 61 6e 75 66 61 63 74 75 .BANK0.Manufactu
30: 72 65 72 30 00 53 65 72 4e 75 6d rer0.SerNum
Table (type 17) : addr=0x000f0dbc len=0059
Ofs-00-01-02-03-04-05-06-07-08-09-0A-0B-0C-0D-0E-0F ASCII
00: 11 1b 34 00 30 00 fe ff 40 00 40 00 00 04 09 00 ..4.0...@.@.....
10: 01 02 13 80 00 9b 02 03 04 05 06 44 49 4d 4d 31 ...........DIMM1
20: 00 42 41 4e 4b 31 00 4d 61 6e 75 66 61 63 74 75 .BANK1.Manufactu
30: 72 65 72 31 00 53 65 72 4e 75 6d rer1.SerNum
Table (type 17) : addr=0x000f0e25 len=0059
Ofs-00-01-02-03-04-05-06-07-08-09-0A-0B-0C-0D-0E-0F ASCII
00: 11 1b 36 00 30 00 fe ff 40 00 40 00 00 04 09 00 ..6.0...@.@.....
10: 01 02 13 80 00 9b 02 03 04 05 06 44 49 4d 4d 32 ...........DIMM2
20: 00 42 41 4e 4b 32 00 4d 61 6e 75 66 61 63 74 75 .BANK2.Manufactu
30: 72 65 72 32 00 53 65 72 4e 75 6d rer2.SerNum
Table (type 17) : addr=0x000f0e8e len=0059
Ofs-00-01-02-03-04-05-06-07-08-09-0A-0B-0C-0D-0E-0F ASCII
00: 11 1b 38 00 30 00 fe ff 40 00 40 00 00 04 09 00 ..8.0...@.@.....
10: 01 02 13 80 00 9b 02 03 04 05 06 44 49 4d 4d 33 ...........DIMM3
20: 00 42 41 4e 4b 33 00 4d 61 6e 75 66 61 63 74 75 .BANK3.Manufactu
30: 72 65 72 33 00 53 65 72 4e 75 6d rer3.SerNum
00:00.0 [000000] [0000:0000] ::
00:00.0 [060000] [8086:29c0] :: PciRoot(0x0)/Pci(0x0,0x0)
00:01.0 [060400] [8086:29c1] :: PciRoot(0x0)/Pci(0x1,0x0)
01:00.0 [030000] [10de:0422] :: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)
00:1a.0 [0c0300] [8086:2937] :: PciRoot(0x0)/Pci(0x1a,0x0)
00:1a.1 [0c0300] [8086:2938] :: PciRoot(0x0)/Pci(0x1a,0x1)
00:1a.2 [0c0300] [8086:2939] :: PciRoot(0x0)/Pci(0x1a,0x2)
00:1a.7 [0c0320] [8086:293c] :: PciRoot(0x0)/Pci(0x1a,0x7)
00:1b.0 [040300] [8086:293e] :: PciRoot(0x0)/Pci(0x1b,0x0)
00:1c.0 [060400] [8086:2940] :: PciRoot(0x0)/Pci(0x1c,0x0)
00:1c.4 [060400] [8086:2948] :: PciRoot(0x0)/Pci(0x1c,0x4)
03:00.0 [01018f] [11ab:6121] :: PciRoot(0x0)/Pci(0x1c,0x4)/Pci(0x0,0x0)
00:1c.5 [060400] [8086:294a] :: PciRoot(0x0)/Pci(0x1c,0x5)
02:00.0 [020000] [1969:1048] :: PciRoot(0x0)/Pci(0x1c,0x5)/Pci(0x0,0x0)
00:1d.0 [0c0300] [8086:2934] :: PciRoot(0x0)/Pci(0x1d,0x0)
00:1d.1 [0c0300] [8086:2935] :: PciRoot(0x0)/Pci(0x1d,0x1)
00:1d.2 [0c0300] [8086:2936] :: PciRoot(0x0)/Pci(0x1d,0x2)
00:1d.7 [0c0320] [8086:293a] :: PciRoot(0x0)/Pci(0x1d,0x7)
00:1e.0 [060401] [8086:244e] :: PciRoot(0x0)/Pci(0x1e,0x0)
05:00.0 [040100] [10ee:3fc5] :: PciRoot(0x0)/Pci(0x1e,0x0)/Pci(0x0,0x0)
05:01.0 [0e0001] [1057:0006] :: PciRoot(0x0)/Pci(0x1e,0x0)/Pci(0x1,0x0)
00:1f.0 [060100] [8086:2918] :: PciRoot(0x0)/Pci(0x1f,0x0)
00:1f.2 [01018f] [8086:2921] :: PciRoot(0x0)/Pci(0x1f,0x2)
00:1f.3 [0c0500] [8086:2930] :: PciRoot(0x0)/Pci(0x1f,0x3)
Scanning smbus_dev <8086, 2930> ...
Slot: 0 Type 19 1024MB (DDR2 SDRAM) 666MHz Vendor=Kingston
PartNo=99U5316-017.A00LF SerialNo=2205B505
Slot: 1 Type 19 1024MB (DDR2 SDRAM) 666MHz Vendor=Kingston
PartNo= SerialNo=903B6E29
Slot: 2 Type 19 1024MB (DDR2 SDRAM) 666MHz Vendor=Kingston
PartNo=99U5316-017.A00LF SerialNo=6004B7E2
Slot: 3 Type 19 1024MB (DDR2 SDRAM) 666MHz Vendor=Kingston
PartNo= SerialNo=8E3B6B29
Patched DMI Table
Platform CPU Info:
FSB=266
MaxSpeed=0
CurrentSpeed=2400
DMI CPU Info:
FSB=266
MaxSpeed=3800
CurrentSpeed=2400
DMI CPU Info 2:
Family=b2
Socket=15
Cores=76 Enabled=71 Threads=65
Found SMBIOS System Information Table 1
Customizing SystemID with : 97878480-fe8d-11d5-a888-001d60967d03
SSDT with CPU C-States generated successfully
SSDT with CPU P-States generated successfully
Using system-type=0x01
FADT: Restart Fix applied!
Patched platform CPU Info:
FSB=266
MaxSpeed=0
CurrentSpeed=3800
Patched SMBIOS CPU Info:
FSB=266
MaxSpeed=3800
CurrentSpeed=2400

Family=b2
Socket=15
Cores=76 Enabled=71 Threads=65
LoadDrivers: Loading from [/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext]
Starting Darwin x86

logout

[Process completed]


Reason for edit: Next time use codebox!
noam a
post Dec 30 2010, 12:12 AM
Post #22
so anyone can help? it's just seems to be some configuration, because istat pro is working, so the plugins working, it's just istat menus.
thanks! any help will be appreciated
Slice
post Dec 30 2010, 05:27 PM
Post #23
QUOTE (noam a @ Dec 30 2010, 04:12 AM) *
so anyone can help? it's just seems to be some configuration, because istat pro is working, so the plugins working, it's just istat menus.
thanks! any help will be appreciated

iStat menu depends on Mac name. May be you eroneously use MacPro4,1?
i3-2120 GA-H61M-S1 UEFI, Radeon HD6670-UEFI, ALC887(VoodooHDA 2.8.6), OS⌘10.9.5, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
noam a
post Dec 30 2010, 08:43 PM
Post #24
QUOTE (Slice @ Dec 30 2010, 06:27 PM) *
iStat menu depends on Mac name. May be you eroneously use MacPro4,1?

I can't, getting a kernel panic when using above 3,1.
but i noticed something real strange.
when i have imac11,1 on smbios, and run Geekbench, the model is "iMac11,1"
but when i'm using macpro3,1 the model is "hackintosh" but i checked multiple times to see if i have anything wrong in my smbios, and didn't find any problem
this is the things in my smbios
CODE
    <key>SMfamily</key>
    <string>MacPro</string>
    <key>SMproductname</key>
    <string>MacPro3,1</string>
    <key>SMmanufacter</key>
    <string>Apple Computer, Inc.</string>
    <key>SMboardproduct</key>
    <string>Mac-F42C88C8</string>
    <key>SMbiosversion</key>
    <string>MP31.88Z.006C.B05.0802291410</string>
    <key>SMserial</key>
    <string>G88014V4XYK</string>
    <key>SMsystemversion</key>
    <string>1.0</string>
    <key>SMcputype</key>
    <string>1281</string>


and here is the imac
CODE
    <key>SMfamily</key>
    <string>iMac</string>
    <key>SMproductname</key>
    <string>iMac11,1</string>
    <key>SMmanufacter</key>
    <string>Apple Computer, Inc.</string>
    <key>SMboardproduct</key>
    <string>Mac-F2268DAE</string>
    <key>SMbiosversion</key>
    <string> IM111.88Z.0034.B02.1003171314</string>
    <key>SMserial</key>
    <string>W89470DZ5RU</string>
    <key>SMsystemversion</key>
    <string>1.0</string>
    <key>SMcputype</key>
    <string>1281</string>


This post has been edited by noam a: Dec 30 2010, 08:44 PM
FormerlyKnownAs
post Dec 30 2010, 08:50 PM
Post #25
Have you edited FackeSMC to match whichever Mac Model you use?

http://prasys.info/2009/11/editing-fakesmc/

D
10.6.4 retail, SW RAID0, Chameleon 2 (Some variant of!), DSDT tickled a little b1t
Intel Core 2 Quad Processor Q9450
MSI Platinum/ Zilent P45 - EFI BIOS v1.0 current backup - asus p5q pro turbo
XFX Radeon HD5770 1GD DDR5
4GB Crucial DDR2 PC2 8500 1066MHz
noam a
post Dec 31 2010, 07:52 AM
Post #26
QUOTE (FormerlyKnownAs @ Dec 30 2010, 09:50 PM) *
Have you edited FackeSMC to match whichever Mac Model you use?

http://prasys.info/2009/11/editing-fakesmc/

D

thanks but i've done it like 10 times. the smc version shown right now is 1.25f4, which i found on google to be for macpro3,1
can't understand, why when i'm using imac geekbench think it's a real imac11,1, but when using macpro3,1 i'm getting "hackintosh"
weird, hope someone can help on this
Slice
post Jan 1 2011, 10:54 AM
Post #27
It seems your hardware is not MacPro
Attached File  ______________2011_01_01___13.52.40.png ( 82.79K ) Number of downloads: 210
i3-2120 GA-H61M-S1 UEFI, Radeon HD6670-UEFI, ALC887(VoodooHDA 2.8.6), OS⌘10.9.5, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
noam a
post Jan 1 2011, 02:56 PM
Post #28
QUOTE (Slice @ Jan 1 2011, 11:54 AM) *
It seems your hardware is not MacPro
Attached File  ______________2011_01_01___13.52.40.png ( 82.79K ) Number of downloads: 210


well we all know it's not a real macpro, so i didn't get what you sad.
is there anything i can do?
actually 4 days from now i'm getting a new hardware (RAM, Graphics).
this is my current specs
mb : p5k-se
cpu:q6600
ram: 4 GB 667 kingston
graphics: 8400 gs 256 mb
sound: rme hdsp 9632
pci : Powercore mk2
OSX: 10.6.5 retail, with some DSDT patching from insanlymac and only one kext in s/l/e.

and i'm getting a new 4 gb 1066 mhz (at the end i want 8 GB of 1066 but that it for now)
and a new 240GT card.

will it change something on the "hardware" side of this?

This post has been edited by noam a: Jan 1 2011, 02:58 PM
uncommah
post Jan 6 2011, 08:53 AM
Post #29
got some questions on this.

i have T9300 cpu and here's my log:

CODE
IntelCPUMonitor: CPU family 0x6, model 0x17, stepping 0x6, cores 2, threads 0
IntelCPUMonitor: BusClock=200MHz FSB=800MHz
IntelCPUMonitor: Platform string M82
IntelCPUMonitor: CPU Tjmax 105


intel specification says t9300 have "# of Threads: 2". why IntelCPUMonitor.kext shows 0?
one more thing unclear for me is that mac platform string. mine show as m82. is it hardcoded? 15" mbp4,1 RPlt = m87, not m82.
Asus V1Sn ~ MacBookPro4,1
Intel® Core 2 Duo T9300 (2.5GHz) / DDR2 667 MHz / NVIDIA GeForce 9500M GS 512MB / Mobile Intel® PM965 Express + ICH8 / ALC660 / Intel® Wireless WiFi Link 4965AGN Apple Atheros AR5008 / eSATA (JMicron JMB360) / Intel® 82566MM Gigabit Ethernet
Slice
post Jan 6 2011, 04:17 PM
Post #30
QUOTE (uncommah @ Jan 6 2011, 12:53 PM) *
got some questions on this.

i have T9300 cpu and here's my log:

CODE
IntelCPUMonitor: CPU family 0x6, model 0x17, stepping 0x6, cores 2, threads 0
IntelCPUMonitor: BusClock=200MHz FSB=800MHz
IntelCPUMonitor: Platform string M82
IntelCPUMonitor: CPU Tjmax 105


intel specification says t9300 have "# of Threads: 2". why IntelCPUMonitor.kext shows 0?
one more thing unclear for me is that mac platform string. mine show as m82. is it hardcoded? 15" mbp4,1 RPlt = m87, not m82.

It is hardcoded for CPU model. Dunno what is better. I set for the my CPU 6-17-6 m82
You can set other value by FakeSMC.info.plist or just rebuild IntelCPUMonitor.
About threads does not matter. Nr of cores does matter. Somw users claim "I have 8 cores but your kext shows only 4!". And I said "4 cores 8 threads"
i3-2120 GA-H61M-S1 UEFI, Radeon HD6670-UEFI, ALC887(VoodooHDA 2.8.6), OS⌘10.9.5, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
Darwin
post Jan 7 2011, 11:16 AM
Post #31
IntelCPUMonitor.kext fails to load on my system. IntelThermal.kext does load, but I lose the CPU Voltages. Please advise. There was no such issue in the former FakeSMC rev405 branch.
Here is my bdmesg readout:

CODE
Last login: Fri Jan 7 06:10:49 on ttys000
Darwins-MacBook-Pro:~ SiN$ bdmesg
msr(221): ia32_perf_stat 0x06004c22
max: 12.5 current: 12.5
CPU: Vendor/Model/ExtModel: 0x756e6547/0x17/0x1
CPU: Family/ExtFamily: 0x6/0x0
CPU: MaxCoef/CurrCoef: 0xc/0xc
CPU: MaxDiv/CurrDiv: 0x1/0x1
CPU: TSCFreq: 2493MHz
CPU: FSBFreq: 199MHz
CPU: CPUFreq: 2493MHz
CPU: NoCores/NoThreads: 2/2
CPU: Features: 0x0000035f
Attempting to read GPT
Read GPT
Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B
Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC
Reading GPT partition 3, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Read HFS+ file: [hd(0,2)/Extra/com.apple.Boot.plist] 1357 bytes.
Attempting to read GPT
Read GPT
Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B
Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC
Reading GPT partition 3, type 48465300-0000-11AA-AA11-00306543ECAC
Reading GPT partition 4, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Read HFS+ file: [hd(0,2)/Extra/com.apple.Boot.plist] 1357 bytes.
Setting boot-uuid to: 91E4AA3A-8EE6-3FBE-8E48-CB289EF7566F
Read HFS+ file: [hd(0,2)/System/Library/CoreServices/SystemVersion.plist] 479 bytes.
Loading Darwin 10.6
Loading kernel mach_kernel
Read HFS+ file: [hd(0,2)/mach_kernel] 4096 bytes.
Read HFS+ file: [hd(0,2)/mach_kernel] 5579907 bytes.
LoadDrivers: Loading from [/Extra/Extensions.mkext]
Read HFS+ file: [hd(0,2)/Extra/Extensions.mkext] 4096 bytes.
Read HFS+ file: [hd(0,2)/Extra/Extensions.mkext] 84935 bytes.
LoadDrivers: Loading from [/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext]
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext] 4096 bytes.
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext] 4207022 bytes.
Read HFS+ file: [hd(0,2)/DSDT.aml] 21117 bytes.
Using PCI-Root-UID value: 0
Read HFS+ file: [hd(0,2)/Extra/SMBIOS.plist] 638 bytes.
Intel GM965/GL960 DRAM Controller [8086:2a00] at 00:00.0
Frequency detected: 332 MHz (665) Dual Channel
CAS:5 tRC:5 tRP:5 RAS:15 (5-5-5-15)
Slot: 0 Type 19 2048MB (DDR2 SDRAM) 666MHz Vendor=Hynix Semiconductor
PartNo=HYMP125S64CP8-Y5 SerialNo=0000301E
Slot: 2 Type 19 2048MB (DDR2 SDRAM) 666MHz Vendor=Hynix Semiconductor
PartNo=HYMP125S64CP8-Y5 SerialNo=0000301E
CPU is Intel® Core™2 Duo CPU T9300 @ 2.50GHz, family 0x6, model 0x17
Patched DMI Table
Found SMBIOS System Information Table 1
Customizing SystemID with : 44454c4c-4400-104b-804a-c4c04f344731
efi_inject_get_devprop_string NULL trying stringdata
Read HFS+ file: [hd(0,2)/DSDT.aml] 21117 bytes.
ACPI table not found: SSDT.aml
FADT: Restart Fix applied!
FADT: Using custom DSDT!
Found ACPI CPU: CPU0
Found ACPI CPU: CPU1
SSDT with CPU C-States generated successfully
SSDT with CPU P-States generated successfully
RSDT: Added 2 SSDT table(s)
FADT: Restart Fix applied!
FADT: Using custom DSDT!
Added 2 SSDT table(s) into XSDT
Starting Darwin x86_64
Mac OS X 10.7.4 on GPT via Chameleon 2.1 on Dell XPS M1530
CPU: Intel Core 2 Duo - T9300 (2.5GHz/6MB Cache/45 nm)
MEMORY: 4GB Dual Channel DDR2 SDRAM at 667MHz
DISPLAY: WSXGA - 15.4 (1680x1050) & 2MP Camera
VIDEO: 256MB DDR2 - NVIDIA GeForce 8600M GT
Slice
post Jan 7 2011, 02:00 PM
Post #32

QUOTE (Darwin @ Jan 7 2011, 03:16 PM) *
IntelCPUMonitor.kext fails to load on my system. IntelThermal.kext does load, but I lose the CPU Voltages. Please advise. There was no such issue in the former FakeSMC rev405 branch.
Here is my bdmesg readout:

Show kernel.log when starting IntelCPUMonitor like this
QUOTE (uncommah @ Jan 6 2011, 12:53 PM) *
i have T9300 cpu and here's my log:

CODE
IntelCPUMonitor: CPU family 0x6, model 0x17, stepping 0x6, cores 2, threads 0
IntelCPUMonitor: BusClock=200MHz FSB=800MHz
IntelCPUMonitor: Platform string M82
IntelCPUMonitor: CPU Tjmax 105


i3-2120 GA-H61M-S1 UEFI, Radeon HD6670-UEFI, ALC887(VoodooHDA 2.8.6), OS⌘10.9.5, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
Darwin
post Jan 7 2011, 04:38 PM
Post #33
QUOTE (Slice @ Jan 7 2011, 09:00 AM) *
Show kernel.log when starting IntelCPUMonitor like this


It doesn't exist because it fails to load. Here is what kernel.log for IntelThermal.kext gives:

CODE
IntelThermal: Based on code by mercurysquad, superhai (C)2008
IntelThermal: CPU family 0x6, model 0x17, stepping 0x6, cores 2, threads 0
IntelThermal: CPU Tjmax 105


Interestingly, my CPU appears to be identical to the CPU of the poster that you referenced.

This post has been edited by Darwin: Jan 7 2011, 04:42 PM
Mac OS X 10.7.4 on GPT via Chameleon 2.1 on Dell XPS M1530
CPU: Intel Core 2 Duo - T9300 (2.5GHz/6MB Cache/45 nm)
MEMORY: 4GB Dual Channel DDR2 SDRAM at 667MHz
DISPLAY: WSXGA - 15.4 (1680x1050) & 2MP Camera
VIDEO: 256MB DDR2 - NVIDIA GeForce 8600M GT
Slice
post Jan 7 2011, 05:19 PM
Post #34
QUOTE (Darwin @ Jan 7 2011, 08:38 PM) *
Interestingly, my CPU appears to be identical to the CPU of the poster that you referenced.

Namely. It is that I want to put your attention. The kext works with the same CPU. Check yourself.
i3-2120 GA-H61M-S1 UEFI, Radeon HD6670-UEFI, ALC887(VoodooHDA 2.8.6), OS⌘10.9.5, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
Darwin
post Jan 8 2011, 01:48 PM
Post #35
QUOTE (Slice @ Jan 7 2011, 12:19 PM) *
Namely. It is that I want to put your attention. The kext works with the same CPU. Check yourself.


CODE
IntelCPUMonitor: CPU family 0x6, model 0x17, stepping 0x6, cores 2, threads 0
IntelCPUMonitor: BusClock=199MHz FSB=796MHz
IntelCPUMonitor: Platform string M82
IntelCPUMonitor: CPU Tjmax 105



Mac OS X 10.7.4 on GPT via Chameleon 2.1 on Dell XPS M1530
CPU: Intel Core 2 Duo - T9300 (2.5GHz/6MB Cache/45 nm)
MEMORY: 4GB Dual Channel DDR2 SDRAM at 667MHz
DISPLAY: WSXGA - 15.4 (1680x1050) & 2MP Camera
VIDEO: 256MB DDR2 - NVIDIA GeForce 8600M GT
SMF
post Jan 8 2011, 07:22 PM
Post #36
Slice,

I'm in the same boat with IntelCPUMonitor not loading. IntelThermal works with the following output -

CODE
Jan 8 13:54:50 localhost kernel[0]: IntelThermal: Based on code by mercurysquad, superhai ©2008
Jan 8 13:54:50 localhost kernel[0]: IntelThermal: CPU family 0x6, model 0x17, stepping 0xa, cores 4, threads 0
Jan 8 13:54:50 localhost kernel[0]: IntelThermal: CPU Tjmax 100


Would you expect IntelCPUMonitor to be working with my E9650?

Thanks,
SMF

This post has been edited by SMF: Jan 8 2011, 07:26 PM
Slice
post Jan 8 2011, 09:06 PM
Post #37
Can you make the command from terminal?
CODE
kextutil /System/Library/Extensions/IntelCPUMonitor.kext

What is output?
i3-2120 GA-H61M-S1 UEFI, Radeon HD6670-UEFI, ALC887(VoodooHDA 2.8.6), OS⌘10.9.5, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
SMF
post Jan 9 2011, 01:25 AM
Post #38
Slice,

CODE
kextutil /System/Library/Extensions/IntelCPUMonitor.kext
Can't stat /System/Library/Extensions/IntelCPUMonitor.kext - No such file or directory.
$


I'm loading the latest FakeSMC from /E/E. When I use IntelCPUMonitor it doesn't load - IntelThermal does and seems to work fine. Right now I do not have IntelCPUMonitor installed in /E/E.

Let me know if there's anything else I can test.

Regards,
SMF

This post has been edited by SMF: Jan 9 2011, 01:27 AM
Slice
post Jan 9 2011, 05:39 AM
Post #39
QUOTE (SMF @ Jan 9 2011, 05:25 AM) *
Slice,

CODE
kextutil /System/Library/Extensions/IntelCPUMonitor.kext
Can't stat /System/Library/Extensions/IntelCPUMonitor.kext - No such file or directory.
$


I'm loading the latest FakeSMC from /E/E. When I use IntelCPUMonitor it doesn't load - IntelThermal does and seems to work fine. Right now I do not have IntelCPUMonitor installed in /E/E.

Let me know if there's anything else I can test.

Regards,
SMF

QUOTE (Slice @ Jan 9 2011, 01:06 AM) *
Can you make the command from terminal?
CODE
kextutil /your_place_where_you_install_the_kext/IntelCPUMonitor.kext

What is output?

angry.gif
i3-2120 GA-H61M-S1 UEFI, Radeon HD6670-UEFI, ALC887(VoodooHDA 2.8.6), OS⌘10.9.5, OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 Realtek LAN v3.1.2
SMF
post Jan 9 2011, 03:47 PM
Post #40
Slice,

Sorry about that - I'll claim I was tired ... sad.gif

Anyway - here' the output with it installed (and not loading)
CODE
bash-3.2# kextutil /Volumes/EFI/Extra/Extensions/IntelCPUMonitor.kext
/Volumes/EFI/Extra/Extensions/IntelCPUMonitor.kext - no dependency found for org.netkas.FakeSMC.
/Volumes/EFI/Extra/Extensions/IntelCPUMonitor.kext - no dependency found for org.netkas.FakeSMC.
/Volumes/EFI/Extra/Extensions/IntelCPUMonitor.kext - no dependency found for org.netkas.FakeSMC.
/Volumes/EFI/Extra/Extensions/IntelCPUMonitor.kext has problems:
Dependency Resolution Failures:
No kexts found for these libraries:
org.netkas.FakeSMC


If I remove IntelCPUMonitor.kext and install IntelThermal.kext I get essentially the same response but it loads and works (I can see Temps with iStat) -
CODE
bash-3.2# kextutil /Volumes/EFI/Extra/Extensions/IntelThermal.kext
/Volumes/EFI/Extra/Extensions/IntelThermal.kext - no dependency found for org.netkas.FakeSMC.
/Volumes/EFI/Extra/Extensions/IntelThermal.kext - no dependency found for org.netkas.FakeSMC.
/Volumes/EFI/Extra/Extensions/IntelThermal.kext - no dependency found for org.netkas.FakeSMC.
/Volumes/EFI/Extra/Extensions/IntelThermal.kext has problems:
Dependency Resolution Failures:
No kexts found for these libraries:
org.netkas.FakeSMC


I installed everything from your 10.6 download in the download thread.

Thanks for your tolerance.

Regards,
SMF

This post has been edited by SMF: Jan 9 2011, 04:02 PM

9 Pages V  < 1 2 3 4 > » 
Add Reply Start a new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members: