QUOTE (majosa @ May 16 2011, 12:33 PM)
My laptop with a old cpu of 32bits, runs lion with a lot of problems. The laptop cannot run Duet because use 64bits and Chameleon only can boot in the Lion DP1 kernel. Other kernels as DP2/DP3 freeze at the boot. The new kernels only support x64?
Where did you find a patched DP3 kernel?
QUOTE (гык-sse2 @ May 17 2011, 06:19 PM)
Where did you find a patched DP3 kernel?
I'm using vanilla kernel. And freeze just boot in the kernel with a black screen, without time to print anything
QUOTE (cparm @ May 7 2011, 12:55 AM)
i just said bingo !!!!, and thank to Apple
Well done and thank you for your research.
Seems with the new Bootloader there is a Issue with Windows involving BCDedit and the BCD Store.
Just done a fresh install and both Charmeleon 877 RC5 and the lastest 1078 RC5 have the same issue where BCD store is not loading correctly and you can not edit with BCDedit which is a must for x64 bit Windows 7 to disable the Driver Enforcement.
If i load the second drive directly to windows it works if i load from charmeleon it will not and will give the following error :-
The boot configuration data store could not be opened.
The requested system device cannot be found.
Even with me using the bcdedit /store c:\boot\bcd which works if i disable driver enforcement and also enable Test Mode neither loads on the reboot like its ment to. anyone else have the same issue.
This can be produced via using two different Hard discs with 1 solely for Mac and the other for Windows 7 x64 bit.
So the question is anyone else having this issue as well other then me.
Lion-booting Chameleon Released, topic split from elsewhere by ignorant admin, credit where due.
May 17 2011, 04:19 PM
Quote
