ProjectOSX

Welcome Guest!

Returning User? Login here.

Want membership privileges? Register here.

 
Start a new topic Add Reply
> Can't Boot Into Gui After 11a444d Update
kocoman
post May 1 2011, 02:33 PM
Post #1
Can't boot into GUI after 11A444d update

Original install (DP2 - 11a419)
then updated to DP2 Update 1 - 11a430e - OK
then update to DP2 Update 2 - 11A444d - can't go into GUI

I used back ALL original 11a419 extensions, but still no go, I don't think its video problem.

I tried FakeSMC 2.5, but still not work.
Using AnV Chameleon patched for lion.

NOTE:

If you can't reply, do the QUIZ on the MAIN page!!!!
Then you can reply!!

I signed up here 2 years ago, never know why I could not post, until a few days ago.
dgtlchlk
post May 3 2011, 05:18 AM
Post #2
You aren't the only one with this problem thats for sure.

I've gone through the laundry list of possible problems.
Clear out caches, boot with -f, boot into -s touch /s/l/e then exit, turn on nv_disable, swap out netkas pc_efi for anv/cparm's latest patched chameleon, dropped in the GeForceGLDriver.bundle from DP2 update 1. None of them have had any effect at all.

Just hangs at the exact same spot every time. Where the window server/login window should come up but it doesn't.

Wonder if anyone using iBoot/xpc has run into the same problem or if its just chameleon users...
kocoman
post May 3 2011, 03:25 PM
Post #3
I can't test out iboot/xpc yet, I have to extract their efildr20, then remake it with some debug statements to see where's its hanging, but to do that I need to understand FFS structure, that will take a while.

one could compare the AnV's patch vs the current RC5 chameleon. but since 10.6 was working well in the past, I did not bother to try RC5.... till now when I have to ready my system for Lion..


NOTE:

If you can't reply, do the QUIZ on the MAIN page!!!!
Then you can reply!!

I signed up here 2 years ago, never know why I could not post, until a few days ago.
kyndder
post May 4 2011, 12:14 AM
Post #4
i have the same problem too...

i tried with XPC, iBOOT, PC-EFI and Chameleon...

all of them freeze in same spot, but the system don`t crash...

he still working but no GUI, like the FakeSMC.kext can`t be loaded
but in verbose mode i see that he loads...

the disk led still working and when i push the caps-lock key i have
response...

i try removing efi-string and video kext`s too...

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench
dantesieg
post May 4 2011, 04:19 PM
Post #5
If you are using VoodooHDA, did you try removing AppleHDA? I had that problem today after update, but after deleting AppleHDA, it booted normally.
kyndder
post May 4 2011, 04:43 PM
Post #6
QUOTE (dantesieg @ May 4 2011, 01:19 PM) *
If you are using VoodooHDA, did you try removing AppleHDA? I had that problem today after update, but after deleting AppleHDA, it booted normally.


yeah, i use, later i'll try remove it and tell you if work...



[EDIT]

Thanks but... don`t work... does`t seems to be any kext except for FakeSMC...
I made a test, i replace all kext`s from the update for the originals from
DP2... and the result was the same... always freeze in same spot...

This post has been edited by kyndder: May 5 2011, 01:32 AM

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench
гык-sse2
post May 6 2011, 02:04 PM
Post #7
http://www.projectosx.com/forum/index.php?...ost&p=14670
UEFI is a great way to get the best of the best in the world of imagination and creativity. ©Google Scribe
kyndder
post May 6 2011, 05:01 PM
Post #8
QUOTE (гык-sse2 @ May 6 2011, 11:04 AM) *


i thank you very much, but i can't find any related topic in applelife...

but, with your tip, i search on the web and find this combination "hold shift before loginwindow".

i'll try later, even never been tryed to use key combination on a hakintosh, and tell you if work...

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench
omg
post Jun 23 2011, 03:25 PM
Post #9
QUOTE (kyndder @ May 6 2011, 05:01 PM) *
i thank you very much, but i can't find any related topic in applelife...

but, with your tip, i search on the web and find this combination "hold shift before loginwindow".

i'll try later, even never been tryed to use key combination on a hakintosh, and tell you if work...


I believe the talk is about it:

Shift+Apple+Q
Log out

Shift+Option Apple+Q
Log out immediately
kyndder
post Jun 24 2011, 12:03 AM
Post #10
QUOTE (omg @ Jun 23 2011, 12:25 PM) *
I believe the talk is about it:

Shift+Apple+Q
Log out

Shift+Option Apple+Q
Log out immediately


Thanks omg, but the problem was solved just after i install 11a480b!!!

wink.gif

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench

Add Reply Start a new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members: