ProjectOSX

Welcome Guest!

Returning User? Login here.

Want membership privileges? Register here.

63 Pages V  « < 23 24 25 26 27 > »   
 Start a new topic Add Reply
> Voodoohda Driver, Fully working!
unixguru
post Aug 28 2010, 07:52 AM
Post #481
For those who are having slow/stuttering sound when the CPU is inactive, it is due to the processor going to Enhanced C1 (C1E) state when idle for extra power saving. Just disable it in the bios. I tried this on a MSI 890-GX motherboard with ALC 889 and I get clean and good quality audio now. I also noticed that everything seems to run smoother with C1E disabled.
Danimator
post Aug 28 2010, 02:21 PM
Post #482
QUOTE (Slice @ Aug 28 2010, 01:07 AM) *
Is the card compatible with HDA specification? Or it is AC97 sound?


I believe HDA? Here's the info Everest gives in Windows 7 for it:

CODE
Field Value
Device Properties
Device Description Creative SB X-Fi Audio Controller
Bus Type PCI Express 2.0 x1
Bus / Device / Function 4 / 0 / 0
Device ID 1102-000B
Subsystem ID 1102-0043
Device Class 0403 (High Definition Audio)
Revision 04
Fast Back-to-Back Transactions Not Supported

Device Features
66 MHz Operation Not Supported
Bus Mastering Enabled


VoodooHDA 0.2.26 works with it, I get sound, but only "Green-line-out". Front panel headphones work, etc.

Upon start-up in OSX, there's 2 messages about time-out as it does the pin-scanning. Can't show you the boot-up log as I uninstalled OSX for now, didn't wanna end up frying the sound-card till it was all working right.

If there's anyway to give you all the info you need within Windows 7, let me know, and I'll work with you to get this all working under OSX if we can wink.gif Thanks!
kingoffright
post Aug 28 2010, 03:07 PM
Post #483
Hi, Slice. Now I am using 2.5.6 and when I wake up my laptop, the volume will be reseted, I mean if I already set a low volume before I make it sleep, after that, it wake up with a big voice. I found this when I listen the music and after sleep, it song with a scream... ph34r.gif
Thank you very much~!
Mido
post Aug 30 2010, 01:42 AM
Post #484
hi all
i have Audio chipset VIA VT1708S
it works good very good with latest voodoohda corrected 2.6.2
all input output audio is detected with colour correct put only one input work if may cables connected angry.gif also output
so if iconnect many output cables only one get detected


as in picture only one analog is detected mellow.gif

so my question what edit should i do to get all analog input and output listed
thanks very much this will help who want to play 5.1 or 7.1 sound system laugh.gif

This post has been edited by Mido: Aug 30 2010, 01:47 AM
PC : AMD Phenom ii x4 955 / ASUS M5A97 / Sapphire HD 6850 / 2x2 1333 KingSton Ram / 2*500GB + 640GB HDD / Thermaltake 500 W
NB : DELL INSPIRON N5110 : CORE I5 2410M / 4GB 1333 Nanya Ram / Intel HD Graphics 3000 + Nvidia GeForce 525M / 640 HDD / DELL Wireless 1702
toadspit
post Aug 30 2010, 08:47 AM
Post #485
Hi Slice,

VoodooHDA is acting strange with my ALC272..
I tried versions 2.5.6, 2.6.1, 2.6.2, here is my report:

# WORKING #
Speaker audio output, switching to headphones when jack is inserted. Line out not tested


# ISSUES #
1. Larsen effect (quite ordinary)..

2. in getdump I find just one "nid" entry
CODE
( nid  5 0x18560010 as  1 seq  0   Digital-out  Jack jack  6 loc 24 color Unknown misc 0)

but I expect more. In Audio settings in the Preference panel I can see (as correct) two outputs (Speaker (CD) and Spdif-out (Black Rear)) and two Inputs (Microphone Black Rear and CD).
Here is my "verbs.txt":

CODE
Codec: Realtek ALC272 Address: 0 DevID: 283902578 (0x10ec0272)

Jack Color Description Node PinDefault Original Verbs
--------------------------------------------------------------------------------------------------------
1/8 Black Speaker at Ext Rear 17 0x11 0x411111f0 01171cf0 01171d11 01171e11 01171f41
1/8 Black Speaker at Ext Rear 18 0x12 0x411111f0 01271cf0 01271d11 01271e11 01271f41
1/8 Black Speaker at Ext Rear 19 0x13 0x411111f0 01371cf0 01371d11 01371e11 01371f41
ATAPI Unknown Speaker at Int ATAPI 20 0x14 0x99130110 01471c10 01471d01 01471e13 01471f99
1/8 Black Speaker at Ext Rear 21 0x15 0x411111f0 01571cf0 01571d11 01571e11 01571f41
1/8 Black Speaker at Ext Rear 22 0x16 0x411111f0 01671cf0 01671d11 01671e11 01671f41
1/8 Black Speaker at Ext Rear 23 0x17 0x411111f0 01771cf0 01771d11 01771e11 01771f41
1/8 Black Mic at Ext Left 24 0x18 0x03a11c30 01871c30 01871d1c 01871ea1 01871f03
ATAPI Unknown Mic at Int ATAPI 25 0x19 0x99a30940 01971c40 01971d09 01971ea3 01971f99
1/8 Black Speaker at Ext Rear 26 0x1a 0x411111f0 01a71cf0 01a71d11 01a71e11 01a71f41
1/8 Black Speaker at Ext Rear 27 0x1b 0x411111f0 01b71cf0 01b71d11 01b71e11 01b71f41
Digital Purple Speaker at Ext N/A 29 0x1d 0x4016892d 01d71c2d 01d71d89 01d71e16 01d71f40
Optical Black SPDIF Out at Ext Left 30 0x1e 0x03451120 01e71c20 01e71d11 01e71e45 01e71f03
1/8 Black HP Out at Ext Left 33 0x21 0x0321141f 02171c1f 02171d14 02171e21 02171f03
--------------------------------------------------------------------------------------------------------


Jack Color Description Node PinDefault Modified Verbs
--------------------------------------------------------------------------------------------------------
ATAPI Unknown Speaker at Int ATAPI 20 0x14 0x99130110 01471c10 01471d00 01471e13 01471f90
1/8 Black Mic at Ext Left 24 0x18 0x03a11c30 01871c30 01871d10 01871ea1 01871f00
ATAPI Unknown Mic at Int ATAPI 25 0x19 0x99a30940 01971c40 01971d00 01971ea3 01971f90
Digital Purple Speaker at Ext N/A 29 0x1d 0x4016892d 01d71c20 01d71d80 01d71e16 01d71f40
Optical Black SPDIF Out at Ext Left 30 0x1e 0x03451120 01e71c50 01e71d10 01e71e45 01e71f00
1/8 Black HP Out at Ext Left 33 0x21 0x0321141f 02171c60 02171d10 02171e21 02171f00
--------------------------------------------------------------------------------------------------------



3. In all the VoodooHDA.prefpanel I tried I can choose only 4 equal voices "Digital-out (HDMI)". All the values are 0.
I also tried recompiling TheKing's version, but I had the same result.

Attached File  voodoopref.jpg ( 34.07K ) Number of downloads: 32


I have read all posts in the topic but I didn't find other reports like mine.
In attachment some extra details.

Attached File  getdump.txt ( 13.02K ) Number of downloads: 11

Attached File  getExtDump.txt ( 3.34K ) Number of downloads: 1

Attached File  audiocodecs.zip ( 34.62K ) Number of downloads: 7

Toshiba Satellite A500-1EK - CPU i5-430M - GPU Geforce 330M - 4GB RAM - 500Gb HD
Everything working but sleep and wireless (a stupid Realtek 8172)
Slice
post Aug 30 2010, 11:32 AM
Post #486
QUOTE (kingoffright @ Aug 28 2010, 07:07 PM) *
Hi, Slice. Now I am using 2.5.6 and when I wake up my laptop, the volume will be reseted, I mean if I already set a low volume before I make it sleep, after that, it wake up with a big voice. I found this when I listen the music and after sleep, it song with a scream... ph34r.gif

There is a way to setup initial values for all devices.
Look into info.plist
CODE
            <key>MixerValues</key>
            <dict>
                <key>iMix</key>
                <string>30</string>
            </dict>

Values from 0 to 99. Names from PrefPane
CODE
Main
Bass
Trable
Synth
PCM
Speaker
Line
Mic
CD
iMix
AltPCM
Rec
iGain
oGain
Line1
Line2
Line3
Dig1
Dig2
Dig3
PhoneIn
PhoneOut
Video
Radio
Monitor

Write more comfortable values for you.

QUOTE (Mido @ Aug 30 2010, 05:42 AM) *
hi all
i have Audio chipset VIA VT1708S
it works good very good with latest voodoohda corrected 2.6.2
all input output audio is detected with colour correct put only one input work if may cables connected angry.gif also output
so if iconnect many output cables only one get detected

as in picture only one analog is detected mellow.gif

so my question what edit should i do to get all analog input and output listed
thanks very much this will help who want to play 5.1 or 7.1 sound system laugh.gif

You just have to correct configs for inputs and output. See tricks 1,2 in topic.
Look for blue digits in configs. You want to have all of them to be different from 1 to 9. Also a, b, c, d, e.

QUOTE (toadspit @ Aug 30 2010, 12:47 PM) *
Hi Slice,

2. in getdump I find just one "nid" entry
CODE
( nid  5 0x18560010 as  1 seq  0   Digital-out  Jack jack  6 loc 24 color Unknown misc 0)

but I expect more.

It is happen when you have one more audio device at video card. Trick 4 in the topic for you.
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.8.4 (12E55),OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 RealtekR1000v3.0.4
toadspit
post Aug 30 2010, 01:25 PM
Post #487
QUOTE (Slice @ Aug 30 2010, 11:32 AM) *
It is happen when you have one more audio device at video card. Trick 4 in the topic for you.


Trick 4 didn't work for me, I had already correctly modified Info.plist the way you suggested.
BUT you put me on the right track: I tried to remove HDMI section in Info.plist and now my getdump.txt make some more sense!
I can change values in pref panel too.
So now I need to fix only Larsen effect (and HDMI of course!)

In attachment the new dumps.
Thank you again!
t.

Attached File  audiodumps_toadspit.zip ( 6.32K ) Number of downloads: 43
Toshiba Satellite A500-1EK - CPU i5-430M - GPU Geforce 330M - 4GB RAM - 500Gb HD
Everything working but sleep and wireless (a stupid Realtek 8172)
Mido
post Aug 30 2010, 05:01 PM
Post #488
QUOTE (Slice @ Aug 30 2010, 02:32 PM) *
You just have to correct configs for inputs and output. See tricks 1,2 in topic.
Look for blue digits in configs. You want to have all of them to be different from 1 to 9. Also a, b, c, d, e.


thanks slice
but icant understand what to do sad.gif
i linked my codecdump under ubuntu 10.04
and this is kext i use

i watched info.plist of configured voodoohda and i see that it need to add pin config to nod to patch
and idont know how to get informaton about my chipset to post it on node to patch sad.gif
sorry me this is my first dealing with audio kext smile.gif
thanks silc

This post has been edited by Mido: Aug 30 2010, 05:06 PM
PC : AMD Phenom ii x4 955 / ASUS M5A97 / Sapphire HD 6850 / 2x2 1333 KingSton Ram / 2*500GB + 640GB HDD / Thermaltake 500 W
NB : DELL INSPIRON N5110 : CORE I5 2410M / 4GB 1333 Nanya Ram / Intel HD Graphics 3000 + Nvidia GeForce 525M / 640 HDD / DELL Wireless 1702
Zane
post Aug 31 2010, 07:57 AM
Post #489
QUOTE (toadspit @ Aug 30 2010, 10:25 PM) *
Trick 4 didn't work for me, I had already correctly modified Info.plist the way you suggested.
BUT you put me on the right track: I tried to remove HDMI section in Info.plist and now my getdump.txt make some more sense!
I can change values in pref panel too.
So now I need to fix only Larsen effect (and HDMI of course!)

In attachment the new dumps.
Thank you again!
t.

Attached File  audiodumps_toadspit.zip ( 6.32K ) Number of downloads: 43



Same here mate. I'm using ALC272. If you need help with normal audio working i have a DSDT Audio patch if you need. smile.gif But i'm gonna be working on VoodooHDA too.

-Zane
Slice
post Aug 31 2010, 10:26 AM
Post #490
QUOTE (toadspit @ Aug 30 2010, 05:25 PM) *
Trick 4 didn't work for me, I had already correctly modified Info.plist the way you suggested.
BUT you put me on the right track: I tried to remove HDMI section in Info.plist and now my getdump.txt make some more sense!
I can change values in pref panel too.
So now I need to fix only Larsen effect (and HDMI of course!)

In attachment the new dumps.
Thank you again!
t.

Attached File  audiodumps_toadspit.zip ( 6.32K ) Number of downloads: 43

I don't know what to do. It will be good if I have the same hardware and watch in real time what is happen. But sorry.
I think the Larsen effect can be excluded playing with iMix&iGain for all devices.
Also I can propose to disable node 11 which is Input Monitor.
CODE
            <key>NodesToPatch</key>
            <array>
            <dict>
                <key>Codec</key>
                <integer>0</integer>
                <key>Node</key>
                <integer>11</integer>
                <key>Enable</key>
                <integer>0</integer>
            </dict>
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.8.4 (12E55),OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 RealtekR1000v3.0.4
Slice
post Aug 31 2010, 10:36 AM
Post #491
QUOTE (Mido @ Aug 30 2010, 09:01 PM) *
thanks slice
but icant understand what to do sad.gif
i linked my codecdump under ubuntu 10.04
and this is kext i use

i watched info.plist of configured voodoohda and i see that it need to add pin config to nod to patch
and idont know how to get informaton about my chipset to post it on node to patch sad.gif
sorry me this is my first dealing with audio kext smile.gif
thanks silc

Your kext is virgin. And you did not provided voodoo.dump
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.8.4 (12E55),OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 RealtekR1000v3.0.4
Zane
post Aug 31 2010, 10:37 AM
Post #492
QUOTE (Slice @ Aug 31 2010, 07:26 PM) *
I don't know what to do. It will be good if I have the same hardware and watch in real time what is happen. But sorry.
I think the Larsen effect can be excluded playing with iMix&iGain for all devices.
Also I can propose to disable node 11 which is Input Monitor.
CODE
            <key>NodesToPatch</key>
            <array>
            <dict>
                <key>Codec</key>
                <integer>0</integer>
                <key>Node</key>
                <integer>11</integer>
                <key>Enable</key>
                <integer>0</integer>
            </dict>


I have a similar hardware too. Trick 4 doesn't work for me either. But if you need any logs i can get them for you.
dejan_gs
post Aug 31 2010, 10:54 AM
Post #493
OK guys....this is my long story.
I apologise again for my poor english, and i hope someone has some minutes and read this post.

My laptop is HP DV5 1130ev. I am now on 10.6.2 and all stuff working (some issues but trying one by one fixing them) except 100% working Sound and HDMI Sound.
Its not exaggeration telling that i have tried 30+ sound kexts that found on forums...But no one gives fully operated sound.
For example using the voodoohda.kext from first page of this thread, have sound but no change on adjust, no response from laptop's volume buttons etc.

Now i use this kext from NachoMamaKid with AdjustFixes :


QUOTE (NachoMamaKid @ Jul 10 2010, 11:00 PM) *
I just made some updates to version 262 of VoodooHDA which should help fix some volume control issues that people have been having.



[attachment=1988:VoodooHDA.kext.zip] Kext (i386/x86_64)

[attachment=1989:voodoohda_262.zip] Source code (I commented my changes with "cue8chalk" to make them easy to spot)



It gives me sound !
It gives me volume control from laptop's adjustment buttons !
Can't mute from laptop's button. Gives me mute graphic icon but nothing happens.
Cant get hdmi sound.

Tried on this kext as on several others to change IOPCIPrimarymatch, fixes some values etc. Nothing changed. Dont know if it is my mistake or hp's sound hardware is so complicated. Until know the best solution is NachoMamaKid's kext but as i said no mute from button and no hdmi sound.

0x111D76B2 so my dev id (decimal) = 287143602

IOPCIPrimaryMatch = 0x293e8086

And my Pinconfig is ( following this tab of registry is :

00a71c1f 00a71d10 00a71e21 00a71f02 00b71c20 00b71d10 00b71ea1 00b71f02 00c71cf0 00c71d00 00c71ef0 00c71f40 00d71c10 00d71d11 00d71e17 00d71f90 00e71c2e 00e71d10 00e71ea1 00e71f28 00f71cf2 00f71d00 00f71ef0 00f71f40 01471cf3 01471d00 01471ef0 01471f40 01871c70 01871d03 01871ea6 01871f90 01971cf5 01971d00 01971ef0 01971f40 01e71ca0 01e71d10 01e71e44 01e71f21 01f71cf5 01f71d00 01f71ef1 01f71f40 02071cf6 02071d00 02071ef1 02071f40 02771cf7 02771d00 02771ef0 02771f40 00000034

Here you can find my dump and extdump --> http://www.mediafire.com/?vtu4vcbhdv4ptvt

And here is what i get from DPCIManager about my hardware components.




Thank you smile.gif

This post has been edited by dejan_gs: Aug 31 2010, 11:04 AM
Mac is for Working, Linux for Networking and Windows for solittaire.
Current project : Fully working Vanilla SL @ HP DV5 1130ev (Progress : 85%)
Zane
post Aug 31 2010, 10:57 AM
Post #494
QUOTE (dejan_gs @ Aug 31 2010, 07:54 PM) *
OK guys....this is my long story.
I apologise again for my poor english, and i hope someone has some minutes and read this post.

My laptop is HP DV5 1130ev. I am now on 10.6.2 and all stuff working (some issues but trying one by one fixing them) except 100% working Sound and HDMI Sound.
Its not exaggeration telling that i have tried 30+ sound kexts that found on forums...But no one gives fully operated sound.
For example using the voodoohda.kext from first page of this thread, have sound but no change on adjust, no response from laptop's volume buttons etc.

Now i use this kext from NachoMamaKid with AdjustFixes :





It gives me sound !
It gives me volume control from laptop's adjustment buttons !
Can't mute from laptop's button. Gives me mute graphic icon but nothing happens.
Cant get hdmi sound.

Tried on this kext as on several others to change IOPCIPrimarymatch, fixes some values etc. Nothing changed. Dont know if it is my mistake or hp's sound hardware is so complicated. Until know the best solution is NachoMamaKid's kext but as i said no mute from button and no hdmi sound.

0x111D76B2 so my dev id (decimal) = 287143602

IOPCIPrimaryMatch = 0x293e8086

And my Pinconfig is ( following this tab of registry is :

00a71c1f 00a71d10 00a71e21 00a71f02 00b71c20 00b71d10 00b71ea1 00b71f02 00c71cf0 00c71d00 00c71ef0 00c71f40 00d71c10 00d71d11 00d71e17 00d71f90 00e71c2e 00e71d10 00e71ea1 00e71f28 00f71cf2 00f71d00 00f71ef0 00f71f40 01471cf3 01471d00 01471ef0 01471f40 01871c70 01871d03 01871ea6 01871f90 01971cf5 01971d00 01971ef0 01971f40 01e71ca0 01e71d10 01e71e44 01e71f21 01f71cf5 01f71d00 01f71ef1 01f71f40 02071cf6 02071d00 02071ef1 02071f40 02771cf7 02771d00 02771ef0 02771f40 00000034

Here you can find my dump and extdump --> http://www.mediafire.com/?vtu4vcbhdv4ptvt


Thank you smile.gif


Could you follow my guide above and try again? Use the verbs and voodoohda dump for easier reference. And if you still cannot, post your info.plist and i'll see if i can help you.
Zane
post Aug 31 2010, 12:57 PM
Post #495
Okay, forget it. Thanks Slice for all your efforts. I've solved my issue. I don't know what The King's Larsen Effect is caused by, neither do i know what toadspit Larsen Effect is caused by. But if i'm not wrong adding iGain to 0 in Mixer Value fixes it. I've set that and i do not get Larsen Effect at all. It solves for me. So i'm not sure if it'll solve for you.

This is my plist

CODE


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleExecutable</key>
<string>VoodooHDA</string>
<key>CFBundleIdentifier</key>
<string>org.voodoo.driver.VoodooHDA</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>VoodooHDA</string>
<key>CFBundlePackageType</key>
<string>KEXT</string>
<key>CFBundleShortVersionString</key>
<string>0.2.62</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>0.2.62</string>
<key>IOKitPersonalities</key>
<dict>
<key>VoodooHDA</key>
<dict>
<key>CFBundleIdentifier</key>
<string>org.voodoo.driver.VoodooHDA</string>
<key>IOClass</key>
<string>VoodooHDADevice</string>
<key>IOMatchCategory</key>
<string>VoodooHDADevice</string>
<key>IOPCIPrimaryMatch</key>
<string>0x3b568086</string>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>IOUserClientClass</key>
<string>VoodooHDAUserClient</string>
<key>MixerValues</key>
<dict>
<key>iMix</key>
<string>70</string>
<key>iGain</key>
<string>0</string>
<key>Mic</key>
<string>70</string>
</dict>
<key>NodesToPatch</key>
<array>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x40f000f0</string>
<key>Node</key>
<integer>17</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x40f000f0</string>
<key>Node</key>
<integer>18</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x40f000f0</string>
<key>Node</key>
<integer>19</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x99138110</string>
<key>Node</key>
<integer>20</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x40f000f0</string>
<key>Node</key>
<integer>21</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x40f000f0</string>
<key>Node</key>
<integer>22</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x99138120</string>
<key>Node</key>
<integer>23</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x04a1104F</string>
<key>Node</key>
<integer>24</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x99a38140</string>
<key>Node</key>
<integer>25</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x40f000f0</string>
<key>Node</key>
<integer>26</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x40f000f0</string>
<key>Node</key>
<integer>27</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x99168050</string>
<key>Node</key>
<integer>29</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x02441030</string>
<key>Node</key>
<integer>30</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x0421101F</string>
<key>Node</key>
<integer>33</integer>
</dict>
</array>
<key>VoodooHDAEnableHalfVolumeFix</key>
<false/>
<key>VoodooHDAEnableVolumeChangeFix</key>
<false/>
<key>VoodooHDAVerboseLevel</key>
<integer>1</integer>
</dict>
</dict>
<key>OSBundleLibraries</key>
<dict>
<key>com.apple.iokit.IOAudioFamily</key>
<string>1.1fc9</string>
<key>com.apple.iokit.IOPCIFamily</key>
<string>2.1</string>
<key>com.apple.kpi.iokit</key>
<string>9.0.0</string>
<key>com.apple.kpi.libkern</key>
<string>9.0.0</string>
<key>com.apple.kpi.mach</key>
<string>9.0.0</string>
<key>com.apple.kpi.unsupported</key>
<string>9.0.0</string>
</dict>
</dict>
</plist>


This post has been edited by Zane: Aug 31 2010, 01:21 PM
toadspit
post Aug 31 2010, 01:58 PM
Post #496
Disabling node 11 works for me! No more Larsen Effect..
I had to adjust Mixer values in Preference panel, but know Speaker is working ok (except HDMI, but I can live without it).
Microphone is working too, even if with a lot of noise. Tweaking values didn't help..

Thank you Slice, and let me know if you need some further test!
Toshiba Satellite A500-1EK - CPU i5-430M - GPU Geforce 330M - 4GB RAM - 500Gb HD
Everything working but sleep and wireless (a stupid Realtek 8172)
Mido
post Aug 31 2010, 02:17 PM
Post #497
QUOTE (Slice @ Aug 31 2010, 01:36 PM) *
Your kext is virgin. And you did not provided voodoo.dump


yes it is the orginal kext biggrin.gif
i tried getdump but only extract first codec HDMI of HD5770 and dont give me two onboard and gfx audio DUMP

so what is correct command to get two chipset to be dumped smile.gif

i did some tries

adding 8 items to node to patch item0 --> item7 for analog audio
but only can get 3 output may differ in changing some numders on it
iget
green front
green rear
orange

in second change

green front
black
green rear


in third change

green front
black
orange


and i can get input two pink front and rear

so after all of this tried
i get 3 analog 2 digital output
and 2 analog in put
remaining 2 analog output and one input

i will continue tring till get all listed laugh.gif


thanks silce very much for your help smile.gif

This post has been edited by Mido: Aug 31 2010, 02:18 PM
PC : AMD Phenom ii x4 955 / ASUS M5A97 / Sapphire HD 6850 / 2x2 1333 KingSton Ram / 2*500GB + 640GB HDD / Thermaltake 500 W
NB : DELL INSPIRON N5110 : CORE I5 2410M / 4GB 1333 Nanya Ram / Intel HD Graphics 3000 + Nvidia GeForce 525M / 640 HDD / DELL Wireless 1702
Danimator
post Aug 31 2010, 03:16 PM
Post #498
Slice? (Or anyone that knows about this stuff)...Please bare with me, this may be long wink.gif

I have two sound cards in my system, one is the X-Fi Titanium Fatal1ty Champion Pci-e card:

http://us.store.creative.com/PCI-Express-S.../B001BDPLJA.htm

And the other is HDMI built into my Ati Radeon 5770 card.


Using VoodooHDA 0.2.61 without any changes EXCEPT for disbling the HDMi on the Ati, as I don't use it, I get sound just fine. But am missing some info e.g. Only Green line-out shows in system prefs, etc. See screenshots below:

Attached File  ScreenShot.jpg ( 199.69K ) Number of downloads: 77


I tried editing the Info.plist to include the info needed, but am completely lost as to entering the correct pins, nodes, etc. I gave it a shot, but it's still not working. Can someone please have a look at the Info.plist attached, and give me a hand? I'd really appreciate it!

CODE
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleExecutable</key>
<string>VoodooHDA</string>
<key>CFBundleIdentifier</key>
<string>org.voodoo.driver.VoodooHDA</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>VoodooHDA</string>
<key>CFBundlePackageType</key>
<string>KEXT</string>
<key>CFBundleShortVersionString</key>
<string>0.2.61</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>0.2.61</string>
<key>IOKitPersonalities</key>
<dict>
<key>SoundCard</key>
<dict>
<key>CFBundleIdentifier</key>
<string>org.voodoo.driver.VoodooHDA</string>
<key>IOClass</key>
<string>VoodooHDADevice</string>
<key>IOMatchCategory</key>
<string>VoodooHDADevice</string>
<key>IOPCIPrimaryMatch</key>
<string>0x000B1102</string>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>IOUserClientClass</key>
<string>VoodooHDAUserClient</string>
<key>MixerValues</key>
<dict>
<key>iMix</key>
<string>30</string>
</dict>
<key>NodesToPatch</key>
<array>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x01014010</string>
<key>Description</key>
<string>Green Line Out 1/8" stereo/mono Jack External Rear</string>
<key>Node</key>
<integer>11</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x01016070</string>
<key>Description</key>
<string>Orange Line Out 1/8" stereo/mono Jack External Rear</string>
<key>Node</key>
<integer>12</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x01011080</string>
<key>Description</key>
<string>Black Line Out 1/8" stereo/mono Jack External Rear</string>
<key>Node</key>
<integer>13</integer>
</dict>
<dict>
<key>Codec</key>
<integer>1</integer>
<key>Config</key>
<string>0x01014090</string>
<key>Description</key>
<string>Grey Line Out 1/8" stereo/mono Jack External Rear</string>
<key>Node</key>
<integer>14</integer>
</dict>
</array>
<key>VoodooHDAVerboseLevel</key>
<integer>1</integer>
</dict>
<key>HDMI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>org.voodoo.driver.VoodooHDA</string>
<key>IOClass</key>
<string>VoodooHDADevice</string>
<key>IOMatchCategory</key>
<string>VoodooHDADevice</string>
<key>IOPCIMatch</key>
<string></string>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>IOUserClientClass</key>
<string>VoodooHDAUserClient</string>
<key>NodesToPatch</key>
<array/>
<key>VoodooHDAVerboseLevel</key>
<integer>1</integer>
</dict>
</dict> <key>OSBundleLibraries</key>
<dict>
<key>com.apple.iokit.IOAudioFamily</key>
<string>1.1fc9</string>
<key>com.apple.iokit.IOPCIFamily</key>
<string>2.1</string>
<key>com.apple.kpi.iokit</key>
<string>9.0.0</string>
<key>com.apple.kpi.libkern</key>
<string>9.0.0</string>
<key>com.apple.kpi.mach</key>
<string>9.0.0</string>
<key>com.apple.kpi.unsupported</key>
<string>9.0.0</string>
</dict>
</dict>
</plist>


Here's my getdump as well:

Attached File  getdump.rtf ( 35.41K ) Number of downloads: 14
Slice
post Aug 31 2010, 05:25 PM
Post #499
@Danimator
I see you are wrong in PCIMatch. Check once more with lspci or SystemInfo.app
Your NodesToPatch didn't hit the target.
CODE
Patched pins configuration:
nid 13 0x01014010 as  1 seq  0      Line-out  Jack jack  1 loc  1 color   Green misc 0
nid 14 0x01016011 as  1 seq  1      Line-out  Jack jack  1 loc  1 color  Orange misc 0
nid 15 0x01011012 as  1 seq  2      Line-out  Jack jack  1 loc  1 color   Black misc 0
nid 16 0x01012014 as  1 seq  4      Line-out  Jack jack  1 loc  1 color    Grey misc 0
nid 17 0x0221401f as  1 seq 15    Headphones  Jack jack  1 loc  2 color   Green misc 0

As all of these nodes lie in one association then you see only one output in PrefPanels.
Dunno if you make the follow
CODE
<!--<key>Description</key>
<string>Black Line Out 1/8" stereo/mono Jack External Rear</string> -->
Пожалуйста, прочитайте ЧаВо!
i3-2120 GA-H61M-S1, Radeon HD6670, ALC887(VoodooHDA 2.8.4), OS⌘10.8.4 (12E55),OS⌘ 10.7.5 Clover FakeSMC_plugins_3.3.1 RealtekR1000v3.0.4
Mido
post Aug 31 2010, 07:29 PM
Post #500
hi slice
i made many tries
and latest results


green F
green R
black
orange
HDMI
SPDIF

grey cant get it



this is simply my pin config and nodes

i only added analog to node to patch
and change last two numbers in pinconfig to 10 --> 90
only i get 4 from 5 output and 2 from 4 input after more than 20 tries blink.gif

so can you tell me what correct pinconfig to do

thanks very much slice

This post has been edited by Mido: Aug 31 2010, 07:31 PM
PC : AMD Phenom ii x4 955 / ASUS M5A97 / Sapphire HD 6850 / 2x2 1333 KingSton Ram / 2*500GB + 640GB HDD / Thermaltake 500 W
NB : DELL INSPIRON N5110 : CORE I5 2410M / 4GB 1333 Nanya Ram / Intel HD Graphics 3000 + Nvidia GeForce 525M / 640 HDD / DELL Wireless 1702
 

63 Pages V  « < 23 24 25 26 27 > » 
Add Reply Start a new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 

Powered By IP.Board © 2013  IPS, Inc.