Please will someone help me to get this graphics card working on my computer.

I have tried nvinject, nvkush, and nvenabler but to no avail.

On nvenabler I am greeted with a blue screen on boot.

Any help will be greatly appreciated.

Alternatively, what card (relatively cheap) can I get that can replace my current one and will work 100% with osx? I have a gigabyte GA-965-P S3 and an Intel E6300 1.86 ghz so I would need a card that would work with my system.

http://www.projectosx.com/forum/index.php?showtopic=4

You need to add the cards device ID to NVDAResman.kext and NVDANV40Hal.kext.

Also normally you must use the monitor output that's closest to the motherboard.

Additionally, there is no 64-bit support for Nvidia 7xxx series cards in Snow Leopard, you must boot in 32-bit mode.

Does this mean that everything needs to be in 32-bit mode? I know my kernel is booting x86. Many extensions, however, show as 64-bit enabled in System Profiler. NVInject is 32-bit, but the other Nvidia kexts load as 64 bit and I have no QE/CI.

I used Graphics Enabler to resolve the nvidia 7300 series problrom card working great