I've installed Kalyway 10.5.2 and ran the 10..5.3 update and network, usb and sound seems to be working ok except for me not being abel to change the screen resolution and every time I do all I get is a blue screen and I have to reboot for the settings to take effect, This if fine if I don't try to install a game because all I get is sound and the blue screen again if I try.
I've installed the NVinstaller 5.1.pkg and OpenGL extension viewer tells me every thing is good but when I look to see if my card is being detected ok I see this
Graphics by NVIDIA:
Chipset Model: Graphics by NVIDIA
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0611
Revision ID: 0x00a2
ROM Revision: NVinject 0.2.1
Displays:
Display Connector:
Status: No display connected
VW222:
Resolution: 1280 x 1024 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
I've read on another forum that it is the display connector not being detected that is the problem but the VW222 is my monitor model number so I hope someone can help me as it's like my days working with Dos 6.22 before Win95 came out and I'm kind of lost .
I have a Asus P5E3 board with a Intel core 2 duo 3Ghz, 4-gig DDR3 ram, Nvidia 8800GT 512meg