that sounds fantastic! hope it doesnt take too much of your time but i guess doing it will make me a tester.

ok im currently running iatkos v7 with the settings suggested all over the internet and everything runs great apart from pcie cards (wifi/ethernet) etc...

heres the txt logs of running both in both. unfortunately i had to reboot to ubuntu to get the lspci from there so stopped my xcode download, really hoping this works now!

thanks in advance,

edit: for some reason my attachments arent showing, heres pastebin links: (hope thats ok mods)

osx 1.5.7 iatkos v7: http://pastebin.com/5wrzxYgm

linux ubuntu (10.04 i think) : http://pastebin.com/cRkD7zMj

edit2: ok sorry, the attachments show now, leaving pastebin for additional options

I checked your files and it seems that your computer has the same bridges as mine. This shouldn't need big changes to the code. Only question remaining is if there'll be problems due to the kext being compiled for Snow Leopard. But we won't know until you test it, eh? I'll post it as soon as I have it compiled!

I checked your files and it seems that your computer has the same bridges as mine. This shouldn't need big changes to the code. Only question remaining is if there'll be problems due to the kext being compiled for Snow Leopard. But we won't know until you test it, eh? I'll post it as soon as I have it compiled!

Ok, here you go. Put to S/L/E and do the usual changes.
Click to view attachment

This shouldn't hang, but if it does, give it some tries.

im currently typing this on osx with airport and ethernet working perfectly, snow leo iatkos s 3, 1.6.3 using your kext.

small issues so far= crashed on leo, (was expected)

only working so far in 32bit mode, 64bit crashes with iopcifamilykext not found

also safe mode because nvenabler failed to start graphics without safe mode, will try modding settings later but for now this kext works.

this man is a genius and deserves the prize!

edit:forgot to mention, airport working because replaced intel card with broadcom a year ago hoping it'd fix osx.

edit2: rebooted into 32bit without safe mode and has booted no problems? maybe needed initial safe boot? not sure. will test further and relay info.

thank you

Here are I am , with AaiPort ))))
Big 10x
But I can use only in 32 bit.

kernel panic with 64 bit.

ANY IDEA?
Click to view attachment


EDIT: Now is OK in 64 bit
Just I compile it for 32/64 bit !

Here are I am , with AaiPort ))))
Big 10x
But I can use only in 32 bit.

kernel panic with 64 bit.

ANY IDEA?
Click to view attachment


EDIT: Now is OK in 64 bit
Just I compile it for 32/64 bit !

Here are I am , with AaiPort ))))
Big 10x
But I can use only in 32 bit.

kernel panic with 64 bit.

ANY IDEA?
Click to view attachment


EDIT: Now is OK in 64 bit
Just I compile it for 32/64 bit !

if not work for U , upload your LSPCI and I will try to make fot U.

Take this CUrro!

http://www.2shared.com/file/9D3tLUbP/IOPCI...-CUrrokext.html


""""" Easy. I don't want to waste your time, but thanks """ this is a 40 sec from my TIME ! It is very easy if U know what u doing!



Really 10X for the SORCE CODE from darkuttek

Put the cart in another SLOT , that will be eliminate the The Touch button (ON /OF)
Second method is to try PIN 20 tape.

But the first is 100% sure ! BUT NEED TO BE BROADCOM OR ATHEROS WIRELESS CARD ! INTEL NOT WORK (ONLY IN 32 BI I HAVE SUCCESS BUT WITH NETWORK SELECTOR GUI 2, BUT NOT WORK CORRECTLY )


Now I'm with that NVenable 64 but have not Success ! ONLY VGA OUT
When I put HDMI Cable , the screen going to flash white blue , until I unplug the cable.

If any ONE can help me ..... will have a beer - ONLINE

OK last qestion for 6930, i write hear, no making off top. So which sound driver are you use? voodohda or applehda?

some one get SMBus addressing ?

Hi guys, could you give me a hand? I replaced my Intel Wireless 5100 AGN by a BCM4321 and I think my IOPCIFamily is wrong again. Could you compile it in 64 bits, pls?

This is my linux lspci: http://hotfile.com/dl/120112270/0be29a2/lspci_linux.txt.html (2shared not work)

Do you think this will work?

This time I promise you an online beer.

My friend your LSPCI is OK. IOPCIFamily that I made for u should be working!
I'm not sure but , did u edit info.plist whit your ID of BCM 4321 ?
If u want open IOREG and U will see that your PCI bridge are get correct addressing.
I thing that u need just to ADD YOUR ID in /system/librarty/extensions/IO80211Family.kext/contents/plugins/AppleAirportBCM4311.kext/contents/info.plist or just install Broadcom43XXFamily.kext

DID U MADE IT?

Yes, I've done all that but still not working.

Maybe it's stupid what I say but I have changed the new wifi card to another PCI slot because in the previous did not recognize it.

I compared my two files and there is a difference in the "Bus: primary=00, secondary=XX, subordinate=XX" between the old and new.

In the first:

Bus: primary=00, secondary=07, subordinate=07, sec-latency=0

And the new:

Bus: primary=00, secondary=05, subordinate=05, sec-latency=0

The I/O behind bridge, Memory behind bridge and Prefetchable memory behind bridge seem to be the same in both. In my MacOS-generated lspci bridges not detected correctly.

My first lspci with Intel wifi 5100 AGN: http://www.2shared.com/document/a7Z-7xS-/L..._5100_AGN_.html
My new lspci with Broadcom BCM4321: http://www.2shared.com/document/7Qr8wVB1/L...__BCM4321_.html
My new MacOS lspci: http://www.2shared.com/file/eK8nfgaH/LsPci...__BCM4321_.html

Ok this is my IOPCIFamily http://www.2shared.com/file/NX-qgYqH/IOPCIFamily.html

put intel WIFI in the first ,original slot (whit touch ON/OF button)
put BCM in second slot , and install my IOPCIFamily

I deleted Xcode because have not space and can't compilate new IOPCIFamily

My IOPCIfamily have

Bus: primary=00, secondary=02, subordinate=04, sec-latency=0


Bus: primary=00, secondary=05, subordinate=05, sec-latency=0


Bus: primary=00, secondary=07, subordinate=07, sec-latency=0


Bus: primary=00, secondary=09, subordinate=09, sec-latency=0


SOO try it !

Unfortunately it does not work. Kernel Panic.
I try to install the "Xcode" and compile it. But I tried another time and could not.

Do you know any tutorial? I followed this: http://www.projectosx.com/forum/index.php?showtopic=2118 but once my problem is to compile and run it for 64 bit with "Xcode".

after u made change, before compile it , in preference some where (I not remember where exactly ) u need to change to compile for Intel 32/64 bit

HOPE this help U

Hi Bronza, sorry about my english...
I have the same Acer 6930G, and i was use your DSDT, and is OK!
After i was installed your IOPCIFAMILY (you have posted at post: #62) but Kernel Panic...

i have a Broadcom 4312, do you think, can i use IOPCIFAMILY that you have made for mr. CUrro?

Please, Help me...???!!????!!!!

If your LSPCI is the same like CUrro's - YES
If it's not the same - NO

EDIT: Now With $75 AAPL Gift Card Bounty!

Hello everyone, I have an Acer Aspire 6930g notebook, and everything is great except for one (major) problem, the PCI/MiniPCIe cards don't get assigned interrupts (or in LAN's case, interrupts and io registers). I've tried to use modified IOPCIFamily kexts (AnV, Slice, chunnan) with little success, they all cause crashes before hitting the desktop in both SL and 10.5.7 (except Slice's SL IOPCIFamily, which doesn't cause a panic, but has no affect on my system). However, chunnan's kext did bring up wl0 for a glorious moment before locking the system up (verbose boot). I'm wondering if it's possible to hard-code the addresses/interrupts in the DSDT, but I'm not much of a programmer. I'm willing to help debug this in any way possible, and have tried:

IOPCIFamily/AMW0/HPETDevice kexts in many different combinations, both with and without DSDT, and with/without Nullcpupowermanagement
Changing DSDT to use Linux's Values (_OSI)
Changing DSDT to use XP/Vista's Values
IOPCMCIAFamily + IOPCIFamily Kexts


I've also tried with and without netkas' fix for acer laptops (involves modifying the USB kext), but it doesn't seem to help.

Attached are a clean copy of my DSDT from linux, and lspci -vv dumps from linux and osx.

I've been trying to figure this out for 3 months now, and lots of people seem to have the same issue with this model, even in freebsd...

12/12/09: To date, I have successfully booted SL with Chunnan's kext once out of around 300 boots (trying desperately to get back to desktop with it so I can dump the proper ioreg).... It is just as stable/reliable in Leo 10.5.6/10.5.7

Click to view attachment
Click to view attachmentClick to view attachment

Relevant System Specs:
Intel PM45 Chipset (ICH9) with Core2Duo CPU
Nvidia GeForce 9600gs with 512mb ram (on PCI bus of some sort, but has seperate entry in dsdt, where all other pci cards are listed as RP01-0x under PCI0@0 in the DSDT)